The Grenadier Forum

Register a free account today to become a member! Once signed in, you'll be able to contribute to the community by adding your own topics, posts, and connect with other members through your own private inbox! INEOS Agents, Dealers or Commercial vendors please contact admin@theineosforum.com for a commercial account.

Tie Down Rail

Local time
7:56 PM
Joined
Feb 28, 2025
Messages
1
Location
Dandenong South
Hi all, I'm interested in receiving an image of bolt head fixing the tie down rial to the body so I can purchase the correct tool to remove and replace as I wish to insert a different fitting inside the rail.
Kind regards,
Gary Plant
 
Hi all, I'm interested in receiving an image of bolt head fixing the tie down rial to the body so I can purchase the correct tool to remove and replace as I wish to insert a different fitting inside the rail.
Kind regards,
Gary Plant
Gary

L track
The L track in the rear cargo area of the car or on the exterior, or both? It sounds like the exterior.

The countersunk bolt heads holding in the L tracks leave the tracks free for standard size L track "nuts".

L track information here.

Bolt head
If you mean the type of bolt head used to secure the L track onto the exterior of the car, it is a Torx TX30 bolt head.

Toolkit
The most useful toolkit I have for the Grenadier/QM is the Wera WER05056490001 Tool-Check PLUS Bit Ratchet Kit (39 Pieces) - which has a Torx TX30 bit.
81L77xBd++L._AC_SL1500_.jpg

81ElYTLYrjL._AC_SL1500_.jpg
 
Last edited:
I see it is your first post. These links may be helpful:

PLACE TO START FOR NEW OWNERS
  1. Download and use the Rok Dr Guide here. Print out a copy and keep it in the car;
  2. Grenadier Accessories (huge selection) for you to buy here;
  3. Kanvas bags and products here;
  4. Information concerning Deutsch DTP plugs here;
  5. Learn more about the CTEK SMARTPASS 120S and 250SE here;
  6. Fuse and relay thread here;
  7. Suggested Grenadier or QM fuses spares kit here;
  8. Littelfuse FHZ busbars used in the Grenadier here. It also informs you where all the busbar cables go;
  9. Finding the aux power outlets in the footwells here;
  10. Table describing all the available wire ends here (more wire ends if you selected the high aux power option);
  11. Various recommended torque settings here;
  12. Tool kits for the Grenadier/QM discussed here;
  13. L track information here;
  14. Oil filter part numbers and third party filters here;
  15. INEOS Air filter parts numbers and cabin filter here;
  16. Filter for Diesel water separator here;
  17. Understanding the NATO plug on the Grenadier here;
  18. What do you use on bolts/screws to stop corrosion, galling and seizing here;
  19. Thread on useful tools for the Grenadier or QM here;
  20. Guide to terminal crimping here;
  21. Anderson plug pitfalls here;
  22. Outback driving tips here; and
  23. Cheap battery monitors here.
INSTALLATION (OR HOW TO) GUIDES
  1. SEAT COVERS: Canny Outdoors video fitting seat covers here;
  2. SPOT LIGHT REPLACEMENTS: Mounting Kit of Exezit Lights here and KC Hilites here;
  3. SIDE MIRRORS: Installing SUMA Performance side mirrors here;
  4. WORKLIGHTS: XHQ Work light here, with installation instructions here, STEDI Work light here and here;
  5. REAR ROOF SHELF: Canny Outdoors video installing KAON rear roof shelf here and a Travel Buddy oven fitted to a rear shelf here;
  6. ROCK SLIDERS (ABNTR4X4): Installation video for ABNTR4x4 Rock Sliders here, with suggested improvements for tougher environments here;
  7. ROO BAR: Installing the Roo Bar here;
  8. ROO BAR LED LIGHTBAR: Installing a 20 inch Lightforce Viper lightbar under the Roo Bar Hoop here;
  9. UHF (CB) RADIO: How to install a UHF (CB) Radio in an INEOS Grenadier without drilling any holes here;
  10. UNDER-BODY ARMOR (RIVAL): Installing Rival under-body armor here;
  11. UNDER-BODY ARMOR (CUSTOM OFFROAD) BASH PLATES: The installation thread is here;
  12. UNDER-BODY ARMOR (CUSTOM OFFROAD DIFF PROTECTORS): Installing the diff protectors and trailing arm protectors is here and the PDF here;
  13. UNDER-BODY ARMOR (ERO FLO FUEL FILTER GUARD): The installation thread is here and the PDF here;
  14. SIDE STEPS: Electric side steps installation guide here;
  15. INSTALLING AFTERMARKET SPEAKERS IN FRONT DOORS: instructions here, German language install here;
  16. INSTALLING BLACK SHEEP NUMBER PLATE HOLDER (US/AU models with OEM winches) here;
  17. INSTALLING REDARC TowPro Elite3: look here.
  18. B PILLAR (DISASSEMBLING): look here with detailed instructions here;
  19. INGEMAR’S GRENADIER HOW TO SERIES here and here (e.g winching, offroad modes, diffs, etc);
  20. INEOS FORUM resources here;
  21. INEOS Fitting Guides here, at least 9 guides from INEOS and Rhino Rack.
 
Last edited:
Back
Top Bottom