Show us your mods.

[Baron von Teuchter]

These are what I used

 

[rovie]

These are what I used

View attachment 7878521

Me too.

 

[scottyboy436]

Finally got my g900 pro working , was user error and didn't realise you put the original fuse into the adapter for the camera to

 

[SkiBum1]

A DIY sleeping platform/storage solution ive been slowly working on over the past few weeks. Not finished yet, but coming along nicely, especially for not knowing much about woodworking before attempting this

Next step is to build the drawer...

That is really nice work with the rear shelving and platform to make the rear cargo area completely flat. Great work man!

 

[scottyboy436]

The transfer cable bracket arrived today , so had to be fitted surprised at how clean underneath the car still is with all the salt and dirt on our roads up this way , also fitted the wolf guard anti glare , seemed to be slightly to big but got it on

 

[scottyboy436]

Wired in the quad lock wireless charge into my car , ran it under the steering wheel and onto the 12v on the driver's side , also got a little rail to mount the quad lock , it's pretty good

 

[parb]

How do you like the quad lock charger?
I used to love my bullet point charger but it doesn't work with the Google pixel 9 XL.

I'm looking for a good alternative.

 

[scottyboy436]

How do you like the quad lock charger?
I used to love my bullet point charger but it doesn't work with the Google pixel 9 XL.

I'm looking for a good alternative.

I have the pixel 9 pro XL , works fine , just need to buy the case for it.

Not really used it yet , but I think I'll get annoyed with the lock function so it the standard quad lock but to unlock it you need to push the back in to be able to spin the phone , if that makes sense

 

[scottyboy436]

How do you like the quad lock charger?
I used to love my bullet point charger but it doesn't work with the Google pixel 9 XL.

I'm looking for a good alternative.

That's all what I got for this

 

[scottyboy436]

Also wired up a stedi c4 diffused light, made a little bracket to keep the cable in place when the rear door is open

 

[Ovrland Bill]

Create Sleep Space: Three Seats + One Berth

1. Remove bottom cushion of rear 2/3rds seat (attachment only held by three screws).
2. Fold seatback of rear 2/3rds seat down flat.
3. Add 7 inch high storage boxes behind flat seatback.
4. Stack recovery and camping gear in front of, and level with, flat seatback.
5. Add 6 foot long mattress on top and get ready for bed.

Note: Storage boxes can be stacked on top of flat seatback when mattress is rolled up and out of the way.

 

[scottyboy436]

Slightly off center , but here's my laser engraved key ring

 

[scottyboy436]

As was mentioned by parb , the quad lock wireless charger wouldn't work with the 9 , so ended up getting a refund so bought the 12 to usb from them

 

[DVA Mechanics]

More posted in the DVA Mechanics 'Support Vendors' thread, but here are some photos of our newly mounted Hi-Lift Jack.

 

[Lollo050968]

I put my black friday deal
on the Grenny: 140cm
semi automatic awning on the back. It’s self-supporting, only at strong wind and heavy rain you need the additional support.
390€, and 1h assembling.

 

[MShepherd]

I put my black friday deal
on the Grenny: 140cm
semi automatic awning on the back. It’s self-supporting, only at strong wind and heavy rain you need the additional support.
390€, and 1h assembling.

Good idea Peter! This rear awning with a solid aluminum cover like the iKamper exoshell and I would be in!

 

[Mad Hatter]

Create Sleep Space: Three Seats + One Berth

1. Remove bottom cushion of rear 2/3rds seat (attachment only held by three screws).
2. Fold seatback of rear 2/3rds seat down flat.
3. Add 7 inch high storage boxes behind flat seatback.
4. Stack recovery and camping gear in front of, and level with, flat seatback.
5. Add 6 foot long mattress on top and get ready for bed.

Note: Storage boxes can be stacked on top of flat seatback when mattress is rolled up and out of the way.

I like that, instant accommodation for minimal hassle. I think I might be doing the same

 

[YIPPE]

I put my black friday deal
on the Grenny: 140cm
semi automatic awning on the back. It’s self-supporting, only at strong wind and heavy rain you need the additional support.
390€, and 1h assembling.

Do you have a link please.

 

[Lollo050968]

Do you have a link please.

Shade PRO

Entdecke die Shade Pro Automarkise von ARCTA â Zuverlässiger Sonnenschutz â Hochwertiges Design â Freistehend & selbstöffnend ⤠Jetzt bestellen!

www.arcta.de

 

[parb]

I have the pixel 9 pro XL , works fine , just need to buy the case for it.

Not really used it yet , but I think I'll get annoyed with the lock function so it the standard quad lock but to unlock it you need to push the back in to be able to spin the phone , if that makes sense

I can't get my pixel 9 pro xl to charge with the quad lock charge head.
I logged a bug report with Google. I assume all works well with your phone?

I really like quadlock super solid mount, and easy to orient the phone sideways if you need to.