Overhead Switch Safeguard

[chrsbe]

...working on a simple click on safeguard for the overhead switches. Just to make sure that Krampus does not jump out of his box in front of officials (or wifes).

 

[Pat-Ard]

Wow, Chris, that looks great!!!!

 

[chrsbe]

it is already working quite well, needs some tweaking before I can share the file.

 

[Pat-Ard]

Wow, Chris, the prototype looks very promising!!!

 

[IslandFalconer]

Looks great, 3D printers and talent.

 

[Dopplemax]

Lock-Out / Tag-Out

 

[chrsbe]

Thanks for your patience, here is the 3d print file for the overhead switch guard. In the movie, you see how it works and how satisfying it clicks when opened and closed.
The switchguard consists of two parts designed to be 3d printed. Use two M2 by 10mm screws to hold them together.

The best print orientation is seen in the image. I recommend using PET (PETG, PETGHF) but it will also work in PLA as print material. It is designed so you don't need print support.

Assembly is easy.
1) Start by clipping the larger part on the U-shaped metal rod.
2) Leave the clip in the open position to insert the smaller part.
3) Fix it with M2x10mm screws.

 

[Znarfgh]

...working on a simple click on safeguard for the overhead switches. Just to make sure that Krampus does not jump out of his box in front of officials (or wifes).
View attachment 7886838

Krampus aside, when do you think it would be necessary to lock on/off the switches?

 

[chrsbe]

If (in theory) you have something plugged in that is not street-legal but comes in handy when off roads. Then one might want to double-check that it does not launch when it shouldn't.