Overhead switch panel: moving switches

[grnamin]

Had anyone tried moving the overhead switches around?

Ext3 - left rear aux power outlet on the roof - rear-facing scene/reverse and left scene lights.
Ext2 - right scene light.
Ext1 - 10A in engine bay - KC Hilites Flex Era 4 backlights
Ext5 - 25A in engine bay - KCHFE4 main lights.
I want Ext2 and 3 to switch places. Same with Ext1 and 4.
Is it as simple as opening the panel and changing the positions of the switches or their wires?

 

[landmannnn]

Have a look here, it seems possible

Roof switch panel removal

If, like me, you’ve found the need to remove the roof swich panel (for strange reasons like running power to a dash cam), here’s a couple of pointers. Many of the little screws are just…

customgrenadier.com

 

[grnamin]

Have a look here, it seems possible

Roof switch panel removal

If, like me, you’ve found the need to remove the roof swich panel (for strange reasons like running power to a dash cam), here’s a couple of pointers. Many of the little screws are just…

customgrenadier.com

Thank you, @landmannnn! Will experiment.

 

[flynnsk]

Have a look here, it seems possible

Roof switch panel removal

If, like me, you’ve found the need to remove the roof swich panel (for strange reasons like running power to a dash cam), here’s a couple of pointers. Many of the little screws are just…

customgrenadier.com

Looking at the provided, looks may be able just to move the switch. The limiting factor may be length of available wiring.

 

[grnamin]

Thank you, All! I was able to reposition the overhead panel switches from this...


To this...


Swapping the labels was the easy part.

Per instructions from the page @landmannnn posted above, the process started with removing 12 screws and pulling out this panel:


The second panel is exposed and these two screws need to be removed:


Used a plastic pry tool to dislodge the main panel:


Main panel dislodged:

Pushed each switch in while pressing on these tabs:


Pressed in and twisted a small fathead screwdriver to unseat the wired plug from the rocker switch assembly:



From there, I repositioned the switches to my desired locations. The front backlight switch wires needed more slack to reach its new position so I had to cut some electrical tape and one ziptie to add just enough slack.

 

[Rok_Dr]

Nice one @grnamin. Thanks for posting. takes me back to rearranging power window switches on my old Range Rover many years ago.

Cheers
Steve

 

[landmannnn]

Interesting to see that looking at the logo on the switch that it appears to be bespoke

 

[Eric]

Interesting to see that looking at the logo on the switch that it appears to be bespoke View attachment 7862358

Adds a nought on the end of the replacement price

 

[Lars]

Thank you Grnamin. It's detailed posts like yours that make the forum invaluable. I hesitate to start pulling on things because I fear breaking it!

 

[grnamin]

Decided to go with old school labels...

 

[Krabby]

Decided to go with old school labels...
View attachment 7862424

Old school. Love it.