Inline DTP Switch

[andrew.roberts]

Team, this is just a quick call out for some help. Has anyone seen a DTP extension cable with an inline switch so that a number of accessories can be used via the roof power outlets while being individually switched? I have work lights on the left and right sides, together with the factor LED front lightbar. I wanted to install a Starlink mini and a rear work light and be able to switch each of these on and off individually.

I have these components :

2 to 1 Deutsch Connector / Splitter | 2 Lights with 1 Wiring Harness 1.5m

The STEDI™ 2 to 1 Deutsch Connector / Splitter is a cable splitter designed for two accessory LED lights to connect to a wiring harness via a male Deutsch plug.

www.stedi.com.au

Power Cable for Starlink Mini to Ineos Grenadier DTP Port

Power your Starlink Mini directly from your Ineos Grenadier with this custom-designed 1, 2 or 3 meter power cable. Built to seamlessly connect your Starlink Mini to the DTP port of your Ineos Grenadier, this cable features a durable 16 AWG wire for reliable performance and longevity. The 2.1mm x...

owloutdoor.com

It allows me to power the starlink; however, all accessories must be on as they are all switched on the overhead panel.

Kind Regards

Andy

 

[Pat-Ard]

Hi Andy,

I can‘t provide you with an inline switch, but what about a Garmin Powerswitch?

 

[andrew.roberts]

Hi Andy,

I can‘t provide you with an inline switch, but what about a Garmin Powerswitch?

Thanks for the response Pat-Ard, looks interesting. Need to look at this in more detail.

Thank you again.

 

[Jiman01]

Switch Pros is another option.

 

[andrew.roberts]

Switch Pros is another option.

Thanks, Jiman01...looks really good. now I just need to work on where to install it and the grounding the accessories. Have you installed this product ?

 

[TheDocAUS]

Team, this is just a quick call out for some help. Has anyone seen a DTP extension cable with an inline switch so that a number of accessories can be used via the roof power outlets while being individually switched? I have work lights on the left and right sides, together with the factor LED front lightbar. I wanted to install a Starlink mini and a rear work light and be able to switch each of these on and off individually.

I have these components :

2 to 1 Deutsch Connector / Splitter | 2 Lights with 1 Wiring Harness 1.5m

The STEDI™ 2 to 1 Deutsch Connector / Splitter is a cable splitter designed for two accessory LED lights to connect to a wiring harness via a male Deutsch plug.

www.stedi.com.au

Power Cable for Starlink Mini to Ineos Grenadier DTP Port

Power your Starlink Mini directly from your Ineos Grenadier with this custom-designed 1, 2 or 3 meter power cable. Built to seamlessly connect your Starlink Mini to the DTP port of your Ineos Grenadier, this cable features a durable 16 AWG wire for reliable performance and longevity. The 2.1mm x...

owloutdoor.com

It allows me to power the starlink; however, all accessories must be on as they are all switched on the overhead panel.

Kind Regards

Andy

I have seen a DT version, not a DTP version. Maybe look further at OEX.

 

[Loc Nar]

@andrew.roberts, if you are interested in the DIY route, I solved this issue with a short DTP to DT conversion cable from one roof power outlet to a three way DT splitter cable and adding inline waterproof switches to each of the three branches - details here.

 

[Jiman01]

Thanks, Jiman01...looks really good. now I just need to work on where to install it and the grounding the accessories. Have you installed this product ?

I have not. I’ve installed similar units in other vehicles but I’m still undecided on the Grenadier.

Agile Offroad has a cool mounting solution if you don’t mind it being mounted to you upper switch panel

INEOS Grenadier Overhead Switch-Pros Mount - Agile Offroad

INEOS Grenadier Overhead Switch-Pros Mount by Agile Offroad. A convenient location and an OEM-look for up to 24 Switch-Pro switches.

agileoffroad.com