Gearbox - gear ratio

[4x4-freak]

Hi everybody,
Does anybody know the different gear and axle ratios?
I‘d like to know what the IG‘s
1st, 2ng gear and axle ratio are.

Thanks for any objective feedback

 

[DaveB]

Hi everybody,
Does anybody know the different gear and axle ratios?
I‘d like to know what the IG‘s
1st, 2ng gear and axle ratio are.

Thanks for any objective feedback

I don't have the individual gear ratios but this info is available

 

[4x4-freak]

Thank you Dave

 

[DaveB]

Thank you Dave

Note that all 8 gears are available in low range unlike many vehicles that stop at 3 or 4.

 

[singlefin]

Gear ratios for the transmission are on wiki. Petrol is 8HP-51 and diesel is 8HP-76.

ZF 8HP transmission - Wikipedia

en.m.wikipedia.org

 

[NQ94]

There is no information on the torque converter ratio. I would expect it would be quite low with the good spread of gears the transmission has.

 

[Rockslide]

There is no information on the torque converter ratio. I would expect it would be quite low with the good spread of gears the transmission has

Torque converters don’t have gear ratios.

 

[NQ94]

Torque converters don’t have gear ratios.

True, torque converters don't have an effective gear ratio but have an input torque multiplication ratio from about 1.5 to 2.5:1. An engine delivering 500Nm will be around 750Nm deliverd to the transmission input at converter stall with a 1.5:1 converter this reduces as a converter reaches coupling point.