The Grenadier Forum

Register a free account today to become a member! Once signed in, you'll be able to contribute to the community by adding your own topics, posts, and connect with other members through your own private inbox! INEOS Agents, Dealers or Commercial vendors please contact admin@theineosforum.com for a commercial account.

Centering the reversing camera

Big hole to plug up!
Not really. Anyone could 3d print a piece, or use a bit of plastic lying around (I have boxes full of random plastic bits I've collected over the years)
And if you have a dark colour shade you'd never notice it.
 
Big hole to plug up! I wonder who at ineos decided to offset it to the middle of the door, not the middle of the car. It’s a non issue imo, but an interesting decision.
They probably had numerous "focus groups" to decide whether aesthetics -middle of the door, or practicality - middle of the car, should prevail.
 
ahh, now I can see the difference in the MY23 camera display and MY24 version. There is a difference after all. However, not by much. About the same difference in an iPhone vs iPhone Max.

1727699703719.png
 
  • Like
Reactions: GM
So, is this 24 or 23?
My pic is MY24. The one in the video is MY23 or MY23.5.

The difference is the older ones appear like a pop up in front of the screen whereas MY24 fills that section of the screen.
 
If going through the trouble to move the camera, why not extend it up to the spare or somewhere where the view isn't obstructed?

Camera relocates on the Bronco are easy and needed for a front winch install.
 
Back
Top Bottom