Buzz Front and Rear lighting packages

Buzz Special Vehicles are extremely pleased to announce that we are the official UK distributor for AEV.

You can browse and shop AEV products here: www.buzzspecialvehicles.co.uk/collections/aev

New products are being listed daily so keep a look out and subscribe to our newsletter to keep up to date.

 

[buzzspecialvehicles]

@RyanT -

Can you comment on the light output of the Rigid360s? I really would like to go with 7" or even 9" Sentinels, as I have a pair of LR-750 (branded "Triple R" in the US) that far outperform any Rigid lights - including $$$ light bars - that I've had to date.

But I can be convinced!

Hey VTgrenadier.

Thanks for reaching out. Its interesting you mentioning Lazer, they are an awesome product and actually manufactured 5 miles from here, i have been selling rigid for 9+ years here in the UK and it did always make me smile when we got orders from Lazer to bench mark RIGID's product against there's.

The 360-series output in my opinion is very good, the other thing to consider is the size of the light and its depth, The Rigid 6" is a seamless integration on the front of the grenadier that is protected well and is less likely to be affected by stone chips due to this, the power output is incredible both on the 6" spot and driving beam patterns, i have never felt the need for "more" so to speak.

The other thing with RIGID is you get a limited lifetime warranty, i think that speaks for itself.

Look, both products are great, so i am sure you will be happy with whichever you choose.

 

[JP4]

View attachment 7875314
View attachment 7875315View attachment 7875316

Hey Ryan two questions:
1. Does this light package work with a factory installed winch?
2. In this picture what wheel and tire configuration is this?

 

[Grumpy]

Can the rear lights be put in one of the auxiliary overhead switches as opposed to the reverse lights? Does the wiring loom supplied in the kit allow this?

Thanks
G.

View attachment 7875316

 

[Grumpy]

Thanks
G.

RyanT

Can the rear lights be put in one of the auxiliary overhead switches as opposed to the reverse lights? Does the wiring loom supplied in the kit allow this?

G.

 

[drinkmorejava]

Oh boy. System 3 drawer system is on the way from OK4WD! I'm incredibly distraught about having another pallet I need to figure out how to get rid of though.

 

[TCMColorado]

Oh boy. System 3 drawer system is on the way from OK4WD! I'm incredibly distraught about having another pallet I need to figure out how to get rid of though.View attachment 7884582

Wood for campfires!!!

 

[drinkmorejava]

Wood for campfires!!!

But all those nails!!

 

[AngusMacG]

Burn the whole pallet then save the nails as then they will be heat-treated

 

[ADVAW8S]

Oh boy. System 3 drawer system is on the way from OK4WD! I'm incredibly distraught about having another pallet I need to figure out how to get rid of though.View attachment 7884582

You need a QM to carry the pallet

 

[drinkmorejava]

@RyanT My System 3 was delivered yesterday. It's beautiful. There aren't a lot of things I buy and go "Ohhhhhh that's nice". The rubber topper and drawer inserts are great touch and will be much appreciated by my large canine. Have you considered how we might had a locking mechanism? I was thinking of mounting a solenoid bolt on the rear left side (in the open area between the wheel well and seat back) and then running a fingerprint reader up to the front of the jack access panel.

 

[RyanT]

@RyanT My System 3 was delivered yesterday. It's beautiful. There aren't a lot of things I buy and go "Ohhhhhh that's nice". The rubber topper and drawer inserts are great touch and will be much appreciated by my large canine. Have you considered how we might had a locking mechanism? I was thinking of mounting a solenoid bolt on the rear left side (in the open area between the wheel well and seat back) and then running a fingerprint reader up to the front of the jack access panel.

Hey @drinkmorejava, apologies for the super late reply. I'm not getting on here as much as I'd like these days.

If you'd like to add a lock I think some,thing simple like this style of lock would work well. There is a lip along the top of the drawer body (we added this for rigidity) that would serve well as a catch. The finger print reader and solenoid idea sounds cool, but not sure in practice how it could be applied as I am not familiar with the setup.

 

[rsdc1]

Hey Guys, We did a series of drone shots recently to try and capture the difference between the various lights. Here are a few comparison shots of the reverse lights. We used a DJI Mavic 4 Pro drone. You can see how the autoexposure is adjusting between the photos of the OEM lights only compared to the photos with our Rigid Kit (you can tell by how much darker the shadows are in the photo of the Rigid lights so these are quite a bit brighter than the photo alludes to).

OEM Reverse lights vs Our Rigid Kit with the SR-M's.
View attachment 7875454View attachment 7875456
View attachment 7875457
View attachment 7875458

And then a few more shots:

View attachment 7875475

View attachment 7875460

I’m really liking the grille conversion, I was looking at lasers before but I think the round lamp looks much better!