What's new
The Grenadier Forum

Register a free account today to become a member! Once signed in, you'll be able to contribute to the community by adding your own topics, posts, and connect with other members through your own private inbox! INEOS Agents, Dealers or Commercial vendors please contact admin@theineosforum.com for a commercial account.

DVA Mechanics

Loc Nar said:
Can we get a pic from further back? I'm wondering how far outside the "side wall" does the mini stick out after installation. Anything past the roof gutter would be no bueno for me since I want to use it in motion, and this looks way past it.
Click to expand...
We finally got our Mini back! Here’s a photo that shows it exactly.
 

Attachments

  • IMG_8048.jpeg
    IMG_8048.jpeg
    1.4 MB · Views: 83
Enhancing Your Ineos Grenadier: Mounting Traction Boards to the Rear Ladder Accessory Carrier

dvamechanics.com

Rear Ladder-Mounted Accessory Carrier for Ineos Grenadier

Overland Gear Made Simple: Premium Ladder-Mounted Accessory Carrier Take your overlanding adventures to the next level with our Premium Ladder-Mounted Accessory Carrier Package. Designed for rugged durability and versatility, this all-in-one mounting system makes it easy to securely attach and...
dvamechanics.com dvamechanics.com

Embarking on off-road adventures with your Ineos Grenadier is all about preparation and adaptability. One essential upgrade that can significantly enhance your vehicle’s performance and versatility is the installation of traction boards onto the rear ladder accessory carrier. Here’s an inside look at how this modification can transform your driving experience.
 

Attachments

  • Recovery Board Side View Medium.jpeg
    Recovery Board Side View Medium.jpeg
    117.3 KB · Views: 54
  • Traction Plate Listing 6 Medium.jpeg
    Traction Plate Listing 6 Medium.jpeg
    103.9 KB · Views: 43
  • Traction Bar Listing 5 Medium.jpeg
    Traction Bar Listing 5 Medium.jpeg
    90 KB · Views: 40
  • Traction Bar Listing 3 Medium.jpeg
    Traction Bar Listing 3 Medium.jpeg
    95.5 KB · Views: 41
  • Traction Bar Listing 2 Medium.jpeg
    Traction Bar Listing 2 Medium.jpeg
    91.6 KB · Views: 39
  • IMG_8133 Medium.jpeg
    IMG_8133 Medium.jpeg
    119.2 KB · Views: 48
  • Like
Reactions: PBD
**Customer Photos**

A customer shared stunning photos of their build, featuring a blue Jerry Can mounted on DVA Mechanics side accessory carrier, perfectly matching their beautiful blue Ineos Grenadier with a factory Rhino Roof Rack. We love seeing our products in action!

www.dvamechanics.com

#DVAMechanics #IneosGrenadier #OverlandLife #AdventureReady #JerryCan #OffRoadAccessories #VehicleMods #OutdoorGear #AdventureSetup #BuiltNotBought
 

Attachments

  • IMG_8162.jpeg
    IMG_8162.jpeg
    49.9 KB · Views: 35
  • IMG_8161.jpeg
    IMG_8161.jpeg
    47.3 KB · Views: 33
  • IMG_8160.jpeg
    IMG_8160.jpeg
    139.3 KB · Views: 30
  • IMG_8159.jpeg
    IMG_8159.jpeg
    74.6 KB · Views: 29
  • IMG_8158.jpeg
    IMG_8158.jpeg
    136.3 KB · Views: 27
  • IMG_8157.jpeg
    IMG_8157.jpeg
    62.6 KB · Views: 27
  • IMG_8156.jpeg
    IMG_8156.jpeg
    128.8 KB · Views: 27
  • IMG_8155.jpeg
    IMG_8155.jpeg
    126.1 KB · Views: 29
  • IMG_8154.jpeg
    IMG_8154.jpeg
    127.3 KB · Views: 23
  • IMG_8153.jpeg
    IMG_8153.jpeg
    119.6 KB · Views: 23
  • IMG_8163.jpeg
    IMG_8163.jpeg
    55.9 KB · Views: 23
  • IMG_8153.jpeg
    IMG_8153.jpeg
    119.6 KB · Views: 19
  • IMG_8154.jpeg
    IMG_8154.jpeg
    127.3 KB · Views: 19
  • IMG_8156.jpeg
    IMG_8156.jpeg
    128.8 KB · Views: 18
  • IMG_8163.jpeg
    IMG_8163.jpeg
    55.9 KB · Views: 18
  • IMG_8162.jpeg
    IMG_8162.jpeg
    49.9 KB · Views: 18
  • IMG_8161.jpeg
    IMG_8161.jpeg
    47.3 KB · Views: 17
  • IMG_8160.jpeg
    IMG_8160.jpeg
    139.3 KB · Views: 14
  • IMG_8159.jpeg
    IMG_8159.jpeg
    74.6 KB · Views: 15
  • IMG_8158.jpeg
    IMG_8158.jpeg
    136.3 KB · Views: 14
  • IMG_8157.jpeg
    IMG_8157.jpeg
    62.6 KB · Views: 13
  • IMG_8156.jpeg
    IMG_8156.jpeg
    128.8 KB · Views: 11
  • IMG_8155.jpeg
    IMG_8155.jpeg
    126.1 KB · Views: 25
DVA Mechanics said:
**Customer Photos**

A customer shared stunning photos of their build, featuring a blue Jerry Can mounted on DVA Mechanics side accessory carrier, perfectly matching their beautiful blue Ineos Grenadier with a factory Rhino Roof Rack. We love seeing our products in action!

www.dvamechanics.com

#DVAMechanics #IneosGrenadier #OverlandLife #AdventureReady #JerryCan #OffRoadAccessories #VehicleMods #OutdoorGear #AdventureSetup #BuiltNotBought
Click to expand...
How does the side mount go for lateral movement?
 
I got my rear ladder mount for hi-lift jacks.
Really easy to install (i put in a few drops of vibra-tite before sealing it up.

The thread for the mount to the hi-lift is M8 course. I used a bolt, put some 1 1/4 inch rubber washers between the mount and the jack, a flat washer and a lock washer before i tightened it up. When the jack is attached its super solid. When its only one attachement point, it rotates a bit. But overall i'm very happy with the mount. Good purchase and i think its very robust.

PXL_20241116_224954787.jpg


You can see here that i used too long screws. The hardware store was out of the size i wanted (35mm long) and i had to use M8 x 45mm.
PXL_20241116_225003445.jpg

PXL_20241116_224959743.jpg
 
parb said:
I got my rear ladder mount for hi-lift jacks.
Really easy to install (i put in a few drops of vibra-tite before sealing it up.

The thread for the mount to the hi-lift is M8 course. I used a bolt, put some 1 1/4 inch rubber washers between the mount and the jack, a flat washer and a lock washer before i tightened it up. When the jack is attached its super solid. When its only one attachement point, it rotates a bit. But overall i'm very happy with the mount. Good purchase and i think its very robust.

View attachment 7877760

You can see here that i used too long screws. The hardware store was out of the size i wanted (35mm long) and i had to use M8 x 45mm.
View attachment 7877761
View attachment 7877762
Click to expand...
That looks Amazing!

So happy with your experience! It looks amazing!
 
Last edited:
parb said:
I got my rear ladder mount for hi-lift jacks.
Really easy to install (i put in a few drops of vibra-tite before sealing it up.

The thread for the mount to the hi-lift is M8 course. I used a bolt, put some 1 1/4 inch rubber washers between the mount and the jack, a flat washer and a lock washer before i tightened it up. When the jack is attached its super solid. When its only one attachement point, it rotates a bit. But overall i'm very happy with the mount. Good purchase and i think its very robust.

View attachment 7877760

You can see here that i used too long screws. The hardware store was out of the size i wanted (35mm long) and i had to use M8 x 45mm.
View attachment 7877761
View attachment 7877762
Click to expand...
Would you mind if we posted your photos on our social media? :). Thanks!
 
For all reading this thread,

I've been out all day yesterday in the northern Nevada mountains on supremely rocky roads shaking in the car for 8 hours. Fun times :)

The ladder mount is rock solid and held my hi lift jack like it's nothing. No looseness, no nothing. No rattle from the rear. I put a Amazon neoprene cover on the lift mechanism to protect it a bit against gravel and dirt.

Highly recommended. Works well.
 
New Customer Photos:

Big thanks to Overland of America for the post using @DVA Mechanics Rear Ladder Mount for their LP Tank installation. That is a beautiful build!

dvamechanics.com

Rear Ladder-Mounted Accessory Carrier for Ineos Grenadier

Overland Gear Made Simple: Premium Ladder-Mounted Accessory Carrier Take your overlanding adventures to the next level with our Premium Ladder-Mounted Accessory Carrier Package. Designed for rugged durability and versatility, this all-in-one mounting system makes it easy to securely attach and...
dvamechanics.com dvamechanics.com
 

Attachments

  • Screenshot 2024-12-05 at 6.33.09 PM.png
    Screenshot 2024-12-05 at 6.33.09 PM.png
    1.3 MB · Views: 11
  • Screenshot 2024-12-05 at 6.32.59 PM.png
    Screenshot 2024-12-05 at 6.32.59 PM.png
    1,017.2 KB · Views: 14
  • Screenshot 2024-12-05 at 6.32.54 PM.png
    Screenshot 2024-12-05 at 6.32.54 PM.png
    1.2 MB · Views: 18
  • Screenshot 2024-12-05 at 6.31.44 PM.png
    Screenshot 2024-12-05 at 6.31.44 PM.png
    1.5 MB · Views: 22
We’re thrilled to share how one of our amazing customers has taken versatility to the next level! Using our Versatile Mounting Clamp, they securely attached it to a Rhino Mount to hold their trusty shovel—a perfect example of creativity and functionality in the field.

Whether you’re gearing up for off-road adventures, tackling tough job sites, or just keeping tools within reach, our mounting solutions make it easy to customize your setup.

Huge thanks to our customer for showing how these products can be combined to get the job done. Keep the ideas coming—we love seeing how you use our products!

Got your own creative setup? Share it with us in the comments or tag us for a chance to be featured!

#VersatileMountingClamp #CustomerSpotlight #InnovationInAction
 

Attachments

  • IMG_0251 Medium.jpeg
    IMG_0251 Medium.jpeg
    71.2 KB · Views: 13
  • IMG_0250 Medium.jpeg
    IMG_0250 Medium.jpeg
    74 KB · Views: 13
  • IMG_0249 Medium.jpeg
    IMG_0249 Medium.jpeg
    73.6 KB · Views: 13
  • IMG_0264 Medium.jpeg
    IMG_0264 Medium.jpeg
    64.7 KB · Views: 13
  • IMG_0263 Medium.jpeg
    IMG_0263 Medium.jpeg
    109.6 KB · Views: 12
  • IMG_0262 Medium.jpeg
    IMG_0262 Medium.jpeg
    107.4 KB · Views: 15
  • IMG_0261 Medium.jpeg
    IMG_0261 Medium.jpeg
    65.7 KB · Views: 15
  • IMG_0259 Medium.jpeg
    IMG_0259 Medium.jpeg
    66.6 KB · Views: 17
  • IMG_0258 Medium.jpeg
    IMG_0258 Medium.jpeg
    45.5 KB · Views: 14
parb said:
For all reading this thread,

I've been out all day yesterday in the northern Nevada mountains on supremely rocky roads shaking in the car for 8 hours. Fun times :)

The ladder mount is rock solid and held my hi lift jack like it's nothing. No looseness, no nothing. No rattle from the rear. I put a Amazon neoprene cover on the lift mechanism to protect it a bit against gravel and dirt.

Highly recommended. Works well.
Click to expand...
We are mounting up a 48" Hi-Lift tomorrow! Thanks for the inspiration and we'll post pics on how easy it is to do. We might even package up the clamps and gaskets to make it easy.
 
You must log in or register to reply here.

Similar threads

DVA Mechanics
DVA Mechanics - YouTube Review of Side Accessory Carrier
Replies
0
Views
68
DVA Mechanics
DVA Mechanics
DVA Mechanics
DVA Mechanics: Lowest Profile Roof Rail (.5" Added Height) - Now Available For Order
Replies
2
Views
425
DVA Mechanics
DVA Mechanics
DVA Mechanics
DVA Mechanics - 20% Holiday Break Special
Replies
0
Views
113
DVA Mechanics
DVA Mechanics
DVA Mechanics
DVA Mechanics - Ladder Mounted Jerry Can Rig
Replies
2
Views
329
DVA Mechanics
DVA Mechanics
DVA Mechanics
DVA Mechanics - Hi-Lift Mounting Clamps
Replies
0
Views
123
DVA Mechanics
DVA Mechanics
Forum Store
The officially unofficial podcast for INEOS Automotive Grenadier Works Podcast
INEOS Grenadier Configurator

Latest posts

Share this page
Back
Top Bottom