Yes, we have the cover lower front only and the rack is silent. Unfortunately can’t speak to the cross bars however the Rhino bars we had fitted previously were also silent.
Thanks DaBull, I have now ordered my Rack based upon your feedback...even prior to taking ownership of my new IG, which should be within the month.Hi Brad, Leitner has indicated that wind noise was solved with a plastic strip that gets inserted into the top channel on the front piece of the frame. It is included when you purchase the rack. I also purchased 4 additional strips that are available in a set called the Wirelok Wire Guide System. The set of 4 is just $38. I installed one of them in the bottom slot of the front facing frame member because it would be difficult to add it after installing the rack. I am holding on to the other 3 strips for perhaps covering some channel openings or for concealing wiring or if needed to perhaps any wind noise down. The quality of the strips is top notch, just like anything else that Leitner makes. Although the 3/4 rack will add more weight than the Leitner Cross Bars, all the extra flexibility you get with the rack makes it a winner in my opinion. You can easily move, remove or add additional load bars to the rack at anytime without taking the rack apart or removing it from your Grenadier. If weight is a factor, perhaps the Leitner Cross Bars are the way to go, it not the Leitner 3/4 Rack is the way to go. Here's some links below. DaBull
Leitner 3/4 Rack Link:
INEOS GRENADIER ACS ROOF 3/4 PLATFORM RACK | 2024+
PART # 00-GR3-4R-1748 Ships within 1 week of ordering! The Leitner Designs ACS ROOF is a product of 10 years, and hundreds of thousands of off-road miles of testing & learning from our Active Cargo System (ACS) modular truck bed rack & cargo system. The ACS ROOF Platform Rack for the Ineos...www.leitnerdesigns.com
Leitner 3/4 Rack Installation Link:
Leitner Wirelok Wire Guide System, (4 extra strips):
WIRELOK WIRE GUIDE SYSTEM
PART # 00-WL460-1371 The WireLok wire guide management system by Leitner is a new way to rout your power cables on the ACS. Made from ASA composite the Wirelok snaps into place on any of the 20 T-channels on the ACS System. The WireLok offers the ultimate clean install without using cable ties...
Leitner extra load bars for the 3/4 Rack link: Note: These are the same as cross bars that come with the rack.
ACS ROOF PLATFORM RACK - Extra Load Bar Kit
39.75" PART # 00-39.75RLBK-1656 47.75" PART # 00-47.75RLBK-1657 52.75" PART # 00-RLBK52.75-1774 55.75" PART # 00-55.75RLBK-1658 62.75" PART # 00-62.75RLBK-1659 Your ACS ROOF Platform Rack includes four load bars. However, if you have large or heavy loads, we suggest you add an additional bar...
2 brackets come in in 1 awning mount kit.
The “front runner” that a number of people have been considering is what I was referring to in my post. That said - the Leitner is still the lowest profile and for those people that have to deal with a parking garage in the US - it still keeps you in the 7” height limit with a bit of room for a lift.
And I have one in SoCal to sell... send me a DM.
www.leitnerdesigns.com
star-mountsystems.com
I don't know anything about the Star Mount and Starlink... the Leitner 3/4 rack (also their full rack) is fantastic.Seriously considering the Leitner 3/4 rack for our Grenadier. Also seriously considering a new Starlink Mini.
Has anyone mounted their Starlink to their Leitner rack?
It looks like Star Mount is working on a mount, but unclear how that would interact with the Leitner system.
I'm also considering whether any of the DTP auxiliary power ports on the roof could power the Starlink Mini.
Would appreciate any thoughts from fellow forum members.
Thanks in advance!
INEOS GRENADIER ACS ROOF 3/4 PLATFORM RACK | 2024+
PART # 00-GR3-4R-1748 Ships within 1 week of ordering! The Leitner Designs ACS ROOF is a product of 10 years, and hundreds of thousands of off-road miles of testing & learning from our Active Cargo System (ACS) modular truck bed rack & cargo system. The ACS ROOF Platform Rack for the Ineos...
Starlink | Roam
Stay connected on the go, starting at $50/mo. Starlink Mini is now available for $599. $299 $499 for the Standard Kit.www.starlink.com
Star-Mount MINI Explorer Mount
STAR-MOUNT EXPLORER MINI It’s MINI TIME!Introducing the All New Star-Mount Mini Explorer Mount! This is our first of many products we will be introducing for the new Starlink Mini Dish! This is a pre production unit and is shown in its raw material form but will be offered in both White and...
Looking at the mounts, if you use this mountSeriously considering the Leitner 3/4 rack for our Grenadier. Also seriously considering a new Starlink Mini.
Has anyone mounted their Starlink to their Leitner rack?
It looks like Star Mount is working on a mount, but unclear how that would interact with the Leitner system.
I'm also considering whether any of the DTP auxiliary power ports on the roof could power the Starlink Mini.
Would appreciate any thoughts from fellow forum members.
Thanks in advance!
INEOS GRENADIER ACS ROOF 3/4 PLATFORM RACK | 2024+
PART # 00-GR3-4R-1748 Ships within 1 week of ordering! The Leitner Designs ACS ROOF is a product of 10 years, and hundreds of thousands of off-road miles of testing & learning from our Active Cargo System (ACS) modular truck bed rack & cargo system. The ACS ROOF Platform Rack for the Ineos...
Starlink | Roam
Stay connected on the go, starting at $50/mo. Starlink Mini is now available for $599. $299 $499 for the Standard Kit.
Star-Mount MINI Explorer Mount
STAR-MOUNT EXPLORER MINI It’s MINI TIME!Introducing the All New Star-Mount Mini Explorer Mount! This is our first of many products we will be introducing for the new Starlink Mini Dish! This is a pre production unit and is shown in its raw material form but will be offered in both White and...
Any update on a possible Australian distributor for your gear yet? Or a timeframe you think it might happen?
I should have said I had my son help me lift it, you also need minimum of one ladder to help position it.
We hoisted the rack onto an aluminum platform at the back of the vehicle first, then lifted it to the roof with a Uhaul blanket protecting the surface while we slid the rack into place.
