Agile Offroad under bench seat ARB air compressor instructions

Shawnpalmer · Mar 15, 2024

ARB Agile Offroad instructions

AZGrenadier · Mar 15, 2024

For anyone wondering the instructions and the entire kit is very easy to follow. Hardest part is pulling the granny apart, the compressor and lines are super easy, seriously plug and play for all the wiring.

Jean Mercier · Mar 15, 2024

Shawnpalmer said:
ARB Agile Offroad instructions

This is a fantastic instruction manual.

But, the dismounting is only valid for a single battery Grenadier. Dismounting panel 2 is impossible in the "two-battery" setup. I have a similar setup of the RB compressor (like some others) but I did cut panel 2 in two pieces to be able to dismount it!

Removing the underseat trim panels / accessing or removing the batteries

So further to this post: Post in thread 'Removing the underseat trim panels / accessing or removing the batteries' https://www.theineosforum.com/threads/removing-the-underseat-trim-panels-accessing-or-removing-the-batteries.12412649/post-1333202065 I've now received answers back from CTEK...

www.theineosforum.com

AZGrenadier · Mar 15, 2024

I removed the second battery, I think they were 13mm bolts holding the mounts down. The CTek must disconnect power when the positive lead was disconnected because I didn’t have any current, the light turned red and I didn’t burn down the truck or house. Even with no current/voltage read I was nervous as I haven’t had a dual battery setup before. That battery was HEAVY but I got by with just twisting it sideways, didn’t have to pull all the way out.

Pat-Ard · Mar 15, 2024

Sorry, for the dumb question, but the Agile set is useable/mountable with the second battery installed?

Jean Mercier · Mar 15, 2024

Pat-Ard said:
Sorry, for the dumb question, but the Agile set is useable/mountable with the second battery installed?

Well, I was looking at the pictures, and at first sight yes!

[EDITED] But you should know that there are 12V wires available at that location (at least in MY dual battery car, and most others) for a compressor mount, therefore you don't need the 40A fuse of Agile, neither need to connect it as they did.
But their solution is nice!

AZGrenadier · Mar 16, 2024

Their solution is pretty slick. It would be more trouble to not use their setup. Also leaves the 40a for something else. Not sure what yet but I am sure something can use the power.

Shorty · May 24, 2024

AZGrenadier said:
Their solution is pretty slick. It would be more trouble to not use their setup. Also leaves the 40a for something else. Not sure what yet but I am sure something can use the power.

Any feedback from those who have installed on the heat generated when in use? Any causes for concern? I like the setup however my only concern is the lack of ventilation in this area, and the heat generated alongside the battery (I have factory dual battery setup). Any feedback would be helpful.

Asnes · May 24, 2024

X2 on feedback please. How long to inflate a 33 from 15 to 35?

AZGrenadier · May 24, 2024

Took about 10 min for stock size 18-36ish. Definitely hot to touch but I didn’t get any readings. I left the seat up when using for the heat. Back of the second battery was warm but definitely not hot. Probably not as warm as a regular under hood battery in Arizona. But again, I don’t have any actual measurements. I did just upgrade to 285/70r17. I’ll time it again. I think I have an infrared for the bbq so I’ll see what I can do.

Asnes · May 26, 2024

AZGrenadier said:
Took about 10 min for stock size 18-36ish. Definitely hot to touch but I didn’t get any readings. I left the seat up when using for the heat. Back of the second battery was warm but definitely not hot. Probably not as warm as a regular under hood battery in Arizona. But again, I don’t have any actual measurements. I did just upgrade to 285/70r17. I’ll time it again. I think I have an infrared for the bbq so I’ll see what I can

Thanks for this. 10 min for 1 tire or all 4? I assume one…. This is helpful. I had a viaair in my pickup truck that I used for towing to air up the rears when I had the trailer attached. It did a good job but corroded internally some and I had to disassemble / rebuild it.

AZGrenadier · May 26, 2024

I am not 100% on the 10 min but it was for all 4. This was for the stock tires. Overall it is a pretty well thought out plug and play kit. Seriously the hardest part was taking the rear panel off to run the lines. I haven’t used my home compressor for anything since installing this.

Search

Search

Agile Offroad under bench seat ARB air compressor instructions

Shawnpalmer

Attachments

AZGrenadier

Global Grenadier #0031

Jean Mercier

GG#920

Removing the underseat trim panels / accessing or removing the batteries

AZGrenadier

Global Grenadier #0031

Pat-Ard

Global Grenadier #00520

Jean Mercier

GG#920

AZGrenadier

Global Grenadier #0031

Attachments

Shorty

Asnes

AZGrenadier

Global Grenadier #0031

Asnes

AZGrenadier

Global Grenadier #0031

Similar threads

Latest posts

Share this page