- Local time
- 4:07 AM
- Joined
- Aug 24, 2022
- Messages
- 2,431
- Reaction score
- 6,016
A very nice set up.First mock up, the back needs to drop to sit under the volume knobs etc, and the front will need to drop and make more of an angle to allow room for electrical connections. But I think the concept will work. Will do a trial 3D print once I have the angles and heights right.
View attachment 7825354
View attachment 7825355
A very nice set up.
What is the end port for? Obviously not a phone jack or Ethernet port.First mock up, the back needs to drop to sit under the volume knobs etc, and the front will need to drop and make more of an angle to allow room for electrical connections. But I think the concept will work. Will do a trial 3D print once I have the angles and heights right.
View attachment 7825354
View attachment 7825355
UhfWhat is the end port for? Obviously not a phone jack or Ethernet port.
UHF, the body of the UHF will be mounted under the dash, either under the steering wheel or glove box. Then attached to that jack and the speaker and controls are all in the mic.What is the end port for? Obviously not a phone jack or Ethernet port.
Going to bring a line up from one of the footwell outlets. Not going to use ignition.Nice setup.
Where do you get + from? Do you even plan to connect ign+ to the power outlets? If yes, where do you get ign+ from?
Could be for the UHF handsetWhat is the end port for? Obviously not a phone jack or Ethernet port.
Make sure you keep the design data so you fill the orders when they come. I reckon I’m in.First test print. Top uncovered for now to see where everything fits. It still needs angles and dimensions fettling a bit, not quite there but making progress.
View attachment 7826127
View attachment 7826128
Will see if my son wants to make a few $ by printing and selling some. If not I will just post his CAD file somewhere and people can print thier own or get their own printedMake sure you keep the design data so you fill the orders when they come. I reckon I’m in.
Sharing the STL file would be epic!Will see if my son wants to make a few $ by printing and selling some. If not I will just post his CAD file somewhere and people can print thier own or get their own printed
Will be test wired tomorrow but awaiting my son going on Semester break to do the final tweaks.Have you made any further progress on this @AnD3rew - what you have so far looks pretty good....
Happy to go either way, $ or print file, but as my son has a 3D printer, having the file would be awesome.Sharing the STL file would be epic!