What software version on customer cars?

Simon C · Jul 21, 2023

Mine is 1939 also

Whilst at Goodwood in the quarry demo I noticed the torque vector display was missing in Offroad Mode on the demo vehicle, when I asked the guy he said that had been removed in later SW releases (this is a shame if you ask me)

Mine shows torque vectoring & difflock status in Offroad mode but the Engine temp is missing like some others

Tomdoc · Jul 21, 2023

emax said:
And where is it?
Is it on your driveway?

Yup - just got it home!!

Jean Mercier · Jul 21, 2023

Tomdoc said:
Yup - just got it home!!

View attachment 7820832

21st of July, National Day in Belgium, no deliveries today, congratulations

And our king is 10 years old, I mean "as a king". And as a kid, he has nothing he can decide himself.

DaveB · Jul 21, 2023

Jean Mercier said:
21st of July, National Day in Belgium, no deliveries today, congratulations
And our king is 10 years old, I mean "as a king". And as a kid, he has nothing he can decide himself.

Bloody hell
for a 10 year old he is looking a bit rough
Must have had a hard life.
Our King is looking a bit worn for a 1 year old also.
My preferred Australian King is at the bottom.
Plenty of them around here.

View: https://www.youtube.com/watch?v=-mKRij7dEHM

Tomdoc · Jul 21, 2023

Jean Mercier said:
21st of July, National Day in Belgium, no deliveries today, congratulations
And our king is 10 years old, I mean "as a king". And as a kid, he has nothing he can decide himself.

Thanks Jean. Greetings to King Philippe.

emax · Jul 23, 2023

Simon C said:
I noticed the torque vector display was missing in Offroad Mode on the demo vehicle, when I asked the guy he said that had been removed in later SW releases (this is a shame if you ask me)

Mine shows torque vectoring & difflock status in Offroad mode but the Engine temp is missing like some others

I seriously hope that this will not happen.

Logsplitter · Jul 23, 2023

Simon C said:
Mine is 1939 also

Whilst at Goodwood in the quarry demo I noticed the torque vector display was missing in Offroad Mode on the demo vehicle, when I asked the guy he said that had been removed in later SW releases (this is a shame if you ask me)

Mine shows torque vectoring & difflock status in Offroad mode but the Engine temp is missing like some others

Engine temp is next to the fuel gauge on mine

DenisM · Jul 23, 2023

The temp. beside the fuel gauge is the water temp. I'm sure mine shows engine OIL temp in the clear space above the gearbox temp (I'll check and report back).

Simon C · Jul 24, 2023

DenisM said:
The temp. beside the fuel gauge is the water temp. I'm sure mine shows engine OIL temp in the clear space above the gearbox temp (I'll check and report back).

Yep that's the one I meant - Oil temp above gearbox temp - missing on mine

Logsplitter · Jul 24, 2023

DenisM said:
The temp. beside the fuel gauge is the water temp. I'm sure mine shows engine OIL temp in the clear space above the gearbox temp (I'll check and report back).

Thanks for that. I thought that was the engine temperature. Looks like I’m missing engine temperature to then

DenisM · Jul 24, 2023

Logsplitter said:
Thanks for that. I thought that was the engine temperature. Looks like I’m missing engine temperature to then

Mine is a diesel... I don't know if there's a difference between sensors in diesels and petrol versions..

Jean Mercier · Jul 24, 2023

DenisM said:
Mine is a diesel... I don't know if there's a difference between sensors in diesels and petrol versions..

Haha, that's interesting:

mine is petrol, no motor temperature!

emax · Jul 24, 2023

Cold fusion engine, I guess.

DenisM · Jul 24, 2023

Jean Mercier said:
Haha, that's interesting:

mine is petrol, no motor temperature!

Have you checked all the menu options... ?
Here are some pics I took last night ( the vehicle has been parked all day, it's evening and the engine temp 12DegC (was 12.5 deg with my infra red "Aldi" laser temp reader. 12Deg C is cold in subtropical Brisbane.. 8 deg C is "bloody freezing"!!
Note that the oil temp in the gearbox and T/F case is 18 Deg C (17 deg C with the temp "gun") while the battery temp inside the vehicle was 18 deg C.
The LHS F/R tyre temperatures are "spurious". I measured them as 17deg/18degC all around
I'd be interested to see what a similar "menu" choice on the main screen of the petrol version shows
BTW (By the Way

) note the 12.5 V battery reading equates to 91% charge. This is 10% above most Voltage vs % Charge charts for lead acid batteries. I think their algorithm needs tweaking...

Jean Mercier · Jul 25, 2023

I have made pictures of exact the same screens, but half an hour after driving the car this morning, and there are differences:

So indeed, in my Petrol car, no engine temperature (oil).
But, I saw also something else: outside temperature 37°C while it is particularly cold for the time of the year: 16°C!
Also surprised that the "water temperature" is still 90°, after half an hour standstill. Strange. Will check later on if after starting the motor if the temperatures are reset!
[EDITED] Indeed after a second short drive, temperatures showed real values, but perhaps because I was driving below sea level

, altimeter showed -4m somewhere in the city of Ghent. Warming up of the earth goes very fast apparently, sea level is rising much faster than expected

DCPU · Sep 5, 2023

@PBD wrote:"Incidentally the software version on the loaner ends in 1941 and I am sure mine was 1939."

Post in thread 'Coil Springs (specs v build)' https://www.theineosforum.com/threads/coil-springs-specs-v-build.12412069/post-1333210745

Those with recent deliveries should have similar?

PBD · Sep 6, 2023

DCPU said:
@PBD wrote:"Incidentally the software version on the loaner ends in 1941 and I am sure mine was 1939."

Post in thread 'Coil Springs (specs v build)' https://www.theineosforum.com/threads/coil-springs-specs-v-build.12412069/post-1333210745

Those with recent deliveries should have similar?

I would think so, 1941 is probably the latest version prior to the update.
I got an email last night telling me that mine has been completed, good news.
Bad news, the long expected update has totally screwed the car up. The gateway module has gone permanently into shutdown! Bosch are sending someone over to try and sort it out but they think it will need a new module

I would advise all of you to hold fire on the update until they give me an update.
DCPU can you copy this to the software update thread as well please.

Wueste · Sep 6, 2023

My car is a petrol with software 1939.
I also do not see any engine temperature in the display.

DCPU · Sep 6, 2023

PBD said:
DCPU can you copy this to the software update thread as well please.

Done:
Post in thread 'Software update' https://www.theineosforum.com/threads/software-update.12412435/post-1333211889

MACS · Sep 6, 2023

SW0000000353001939

Search

Search

What software version on customer cars?

Simon C

Tomdoc

Jean Mercier

GG#920

DaveB

Tomdoc

emax

Photo Contest Winner

Logsplitter

Photo Contest Winner

DenisM

Simon C

Logsplitter

Photo Contest Winner

DenisM

Jean Mercier

GG#920

emax

Photo Contest Winner

DenisM

Jean Mercier

GG#920

DCPU

PBD

Wueste

DCPU

MACS

Similar threads

Latest posts

Share this page