The Grenadier Forum
Register Now for enhanced site access.
INEOS Agents, Dealers or Commercial vendors please contact admin@theineosforum.com for a commercial account.

Under bonnet - removing bulkhead/scuttle panel access covers

DCPU

Grenadier Owner
Local time
11:24 AM
Joined
Jul 27, 2022
Messages
6,005
Reaction score
13,343
These two:
IMG_20230626_104742579.jpg
IMG_20230626_104750808_MP.jpg


One plastic 10mm nut (mine stripped on offside) and two clips on the inside edge:
IMG_20230626_105304447.jpg
IMG_20230626_105737886.jpg


And an extra (easter egg?) lambda on the offside with great access to the wiper motor:
IMG_20230626_105636093.jpg


And access to the air intake/heater on the nearside:
IMG_20230626_110733582.jpg
 

DCPU

Grenadier Owner
Local time
11:24 AM
Joined
Jul 27, 2022
Messages
6,005
Reaction score
13,343
On the offside there appears to be some form of sealant over the (badly fitted) fir tree cable clip. I wonder if there's been an issue of water ingress onto the wiper electrics/motor?:
IMG_20230626_110255942_HDR.jpg


Whilst no evidence of any sealant on the other side:
IMG_20230626_110756059.jpg
 

DenisM

Grenadier Owner
Lifetime Supporter
Local time
9:24 PM
Joined
Jan 26, 2022
Messages
2,197
Reaction score
4,382
Location
Brisbane, Queensland Australia
A great help for future! thank you @DCPU !
The heater access on the nearside is reminiscent of similar access for the RangieP38... which used leak until I fabricated a bunding around it as per what's shown here! excellent! 👍
 

DCPU

Grenadier Owner
Local time
11:24 AM
Joined
Jul 27, 2022
Messages
6,005
Reaction score
13,343
Despite all the cover and foam seals - there was more than a fair amount of tree debris sitting in the scuttle - not sure how all that was getting in?
IMG_20230626_110816056_HDR.jpg
 

DCPU

Grenadier Owner
Local time
11:24 AM
Joined
Jul 27, 2022
Messages
6,005
Reaction score
13,343
And anyone with water ingress issues may want to see if they have two areas where the the bulkhead seal appears to sit away from the bulkhead:
IMG_20230626_110021159_HDR.jpg
IMG_20230626_110051141_HDR.jpg


* Not sure why photos are portraits, they were landscape and illustrated the gaps better?
 

Norb-TX

Grenadier Owner
Local time
5:24 AM
Joined
Jun 2, 2022
Messages
573
Reaction score
726
Location
Houston
Looks like the water just goes straight through to the air vent. I mean, you can see the a/c condenser through it.
 
  • Like
Reactions: PBD

anand

Photo Contest Winner
Forum Moderator
Grenadier Owner
Lifetime Supporter
Local time
6:24 AM
Joined
Mar 12, 2023
Messages
2,992
Reaction score
4,846
Location
Maryland
Looks like the water just goes straight through to the air vent. I mean, you can see the a/c condenser through it.
That's the cabin air filter, not the condenser... And that is exactly how it is on many (most) vehicles. My Sprinter is the exact same way, except it has a giant air duct guiding air towards it. The lips around the opening will keep water out (unless, of course, you are driving in water up to the windshield, but you'll have plenty of water intrusion from other places at that point)
 
  • Like
Reactions: PBD

Norb-TX

Grenadier Owner
Local time
5:24 AM
Joined
Jun 2, 2022
Messages
573
Reaction score
726
Location
Houston
But as pointed out, there is a lot of debis around the intake. Maybe getting some mist when driving in the rain?
 
  • Like
Reactions: PBD

anand

Photo Contest Winner
Forum Moderator
Grenadier Owner
Lifetime Supporter
Local time
6:24 AM
Joined
Mar 12, 2023
Messages
2,992
Reaction score
4,846
Location
Maryland
But as pointed out, there is a lot of debis around the intake. Maybe getting some mist when driving in the rain?
I doubt it very much; the debris is very clearly in the tray area; additionally, it's not out of the ordinary (on all vehicles) to get some leaves/etc on the cabin air filter when you're replacing them
 
  • Like
Reactions: PBD

Miltz

Grenadier Owner
Local time
9:54 PM
Joined
May 11, 2023
Messages
133
Reaction score
174
Location
Australia
Despite all the cover and foam seals - there was more than a fair amount of tree debris sitting in the scuttle - not sure how all that was getting in?
View attachment 7818029
Is this the way to replace the pollen filter or is there access to it from within the cabin, via the footwell or bending the glovebox? I can't see any way of accessing it from within the cabin.
 

Skydance

Grenadier Owner
Local time
11:24 AM
Joined
May 16, 2023
Messages
433
Reaction score
555
Location
MANCHESTER
Is this the way to replace the pollen filter or is there access to it from within the cabin, via the footwell or bending the glovebox? I can't see any way of accessing it from within the cabin.
The cabin filter can be accessed underneath the passenger glove box. Move seat backwards and look underneath glovebox area, unclip plastic tabs on both sides and slide the cabin filter out.
 

Tinerfeño

Grenadier Owner
Local time
11:24 AM
Joined
Oct 20, 2023
Messages
257
Reaction score
343
Location
San Juan de la Rambla, España
The small debris will go to the ducts before pollen filter with heater intake air. Probably not in rain as their weight increases and the stuff gets sticky.
 
Last edited:

Kevin Mokracek

Grenadier Owner
Local time
3:24 AM
Joined
Oct 20, 2023
Messages
136
Reaction score
151
Location
California, USA
Anyone have any luck finding a cabin air filter online?
Nope, bought the same one Elijah did and had to return it. Bought another from Rock Auto that said it was for the Grenadier and that didn't fit either. So far haven't found a aftermarket cabin filter that works. Had the same bad luck with air filters too. Finally got the correct Wix Air filter number for the Grenadier WA11035 is a perfect fit for the air filter.
 
Back
Top Bottom