Anyone fitting an UltraHook to their winch?

AnD3rew · May 28, 2023

Davman said:
If we need to leave 250mm, then I will be installing a couple of clips behind the number plate to hold the rope.

Yes been thinking about this will do something similar. Have wondered if you could use one of these either side and wrap it around one side and hook on the other?

Steve.B · May 29, 2023

bakepl said:
Maxtrax winch widget... $11 AUD

Wow that is even better than a bit of sawn off broom stick as you don't need insulation tape to stop it sliding out.
I will definitely get one, and if I have to shorten my winch rope by 250mm or even 1 metre I will, but my feeling is that shortening the rope won't be necessary if you wind the rope in neatly after use.

globalgregors · May 31, 2023

Steve.B said:
but my feeling is that shortening the rope won't be necessary if you wind the rope in neatly after use.

Yep, this also my working assumption. Finally put my Navy Reserve Cadet rope coiling talents to use.

Miki · May 31, 2023

TheDocAUS said:
Does anyone intend to fit an UltraHook to their winch? Happy to hear from users of the hook on other vehicles.

Not at £230 ...... lost the plot he has ... IMO

Miki · May 31, 2023

Found a better price, perfect for those with too much money ... https://4x4obsession.co.uk/products/factor-55-ultrahook?variant=41188610474182

Lollo050968 · Jun 4, 2023

Now put the donut at the winch and protect it professional. There is enough place in the chamber between winch and registration plate. The screws have poor quality and should be replaced from me.

globalgregors · Jun 4, 2023

Lollo050968 said:
Now put the donut at the winch and protect it professional. There is enough place in the chamber between winch and registration plate. The screws have poor quality and should be replaced from me.

It’s not visible from outside? We’ve not seen the plastic bumper arrangement down here…

Lollo050968 · Jun 4, 2023

nothing visible, only the two scews on the top

HorstVoll · Jun 4, 2023

Lollo050968 said:
Now put the donut at the winch and protect it professional. There is enough place in the chamber between winch and registration plate. The screws have poor quality and should be replaced from me.

Looks like a good fit. Which size recovery ring did you choose and what WLL does it have?

Lollo050968 · Jun 4, 2023

41000lbs,
The recovery ring is suitable for 7/16 inch or 1/2 inch soft shackles with 3/16 inch, 1/4 inch or 3/8 inch winch ropes
bought at amazon, 25€

Miki · Jun 4, 2023

Lollo050968 said:
nothing visible, only the two scews on the top

I was wondering ... so to get at the winch you need to remove the two screws and the cover which also holds the number ppate ?

Lollo050968 · Jun 4, 2023

Miki · Jun 4, 2023

Well, that's carp ..... obviously not designed by someone who'se needed to use a winch very often...
I am going off this bumper ...

Lollo050968 · Jun 4, 2023

Mhh, I am happy with it, I do not often need it, if I need if I am Offroad, and than I don‘t need the number plate. So 90% the winch is well protected behind the plastic cover. If it’s needed, the numberplate is safe in the car. Offroad no police will check.
The bumper is the result of the EU pedestrian protection rules.

DCPU · Jun 4, 2023

@Lollo050968 ~ you seen to have all the winch rope on the drum? I thought you had to leave some off?

Lollo050968 · Jun 4, 2023

DCPU said:
@Lollo050968 ~ you seen to have all the winch rope on the drum? I thought you had to leave some off?

I think not for “transport“, I opened it only to assemble the ring, for this I left a view cm rop off , using the lever for the free running mechanism.

CBN · Aug 5, 2023

TheDocAUS said:
Does anyone intend to fit an UltraHook to their winch? Happy to hear from users of the hook on other vehicles.

View: https://youtu.be/wADHOWvK6mY

UltraHook

The low-profile UltraHook features an industry-first closed system shackle mount hole machined into the body of the hook and installs in minutes. The original Ultrahook has a maximum load of 16,000 lbs, for use with Trucks and Jeeps.

factor55.com

I've just installed the factor 55 hook and load spool

DCPU · Aug 5, 2023

I see someone else has fitted something similar:

ECrider · Aug 5, 2023

That flip up plate is very tidy compared to the UK version I'm expecting 'soon'!

Easy fit when removed the original fiddly plastic part I wonder. Looks like the Oz bumper.

DCPU · Aug 5, 2023

Sorry yes, Oz photo.

Search

Search

Anyone fitting an UltraHook to their winch?

AnD3rew

Inch deep and a mile wide.

Steve.B

globalgregors

Photo Contest Winner

Miki

Miki

Lollo050968

Attachments

globalgregors

Photo Contest Winner

Lollo050968

Attachments

HorstVoll

Lollo050968

Miki

Lollo050968

Miki

Lollo050968

DCPU

Lollo050968

CBN

UltraHook

Attachments

DCPU

ECrider

DCPU

Similar threads

Latest posts

Share this page