What did you do with your Grenadier today?

Spjnr · Jun 2, 2023

So I went to Buzz special vehicles today to get my new wheels and tyres fitted. 285 70 17 general grabber X3s and Braid winrace T

Wilaspira · Jun 2, 2023

Spjnr said:
So I went to Buzz special vehicles today to get my new wheels and tyres fitted. 285 70 17 general grabber X3s and Braid winrace TView attachment 7814439

Looks great - I am very tempted to do the same

Krabby · Jun 2, 2023

macstech said:
What did I do with the Grenadier today?
I installed a Kenwood DRV-A501W dashcam on the frontscreen. Used CA-DR1030 cabling.
Easy task, around 45min. Rear cam next after we found more details about the removal of the "aircraft panel" (overhead switch panel)

Start pulling the side panel towards driver and work your way through all the clips & screws.
Route the cable to the fusebox and grab some constant power. (With xtra fuse!)

View attachment 7814431

So we have evidence that the mounting points for the handle are on the LHD available.

View attachment 7814432

Probably first picture of the headunit under the steering wheel

View attachment 7814433

View attachment 7814434

Thanks for the photos! That's exactly what this forum needs and is about!

I'll certainly be ordering a LHD grab handle. I'm short and I'd rather use that than yanking on the steering wheel every time.

As for the "head unit" - are you referring to the greyish rectangular box with the holes - middle right of the frame?

Krabby · Jun 2, 2023

Spjnr said:
So I went to Buzz special vehicles today to get my new wheels and tyres fitted. 285 70 17 general grabber X3s and Braid winrace TView attachment 7814439

Very nice! So a little bigger than stock - looks fantastic. Truck can handle the tire increase with no issues? I know it's not a huge jump but you might be the first member to swap for bigger tires (and posted about it).

emax · Jun 2, 2023

macstech said:
What did I do with the Grenadier today?
I installed a Kenwood DRV-A501W dashcam on the frontscreen. Used CA-DR1030 cabling.
Easy task, around 45min. Rear cam next after we found more details about the removal of the "aircraft panel" (overhead switch panel)

Start pulling the side panel towards driver and work your way through all the clips & screws.
Route the cable to the fusebox and grab some constant power. (With xtra fuse!)

View attachment 7814431

So we have evidence that the mounting points for the handle are on the LHD available.

View attachment 7814432

Probably first picture of the headunit under the steering wheel

View attachment 7814433

View attachment 7814434

I agree with @Krabby. That's the stuff which brings us forward, thank you so much!

MACS · Jun 2, 2023

Krabby said:
As for the "head unit" - are you referring to the greyish rectangular box with the holes - middle right of the frame?

Yeapph, I missed to take a photo from the label. But said something like "headunit main blabla".

Jean Mercier · Jun 2, 2023

macstech said:
What did I do with the Grenadier today?
Rear cam next after we found more details about the removal of the "aircraft panel" (overhead switch panel)

I am very interested: where did you find details about removing the "aircraft panel"?

DaveB · Jun 2, 2023

emax said:
If these are the Frontrunner chairs, I have two of them. Very robust, and comfortable imo.

What is this black frame below the roof rack? Looks like a sliding mechanism?

That is for the table

View: https://www.youtube.com/watch?v=eT7HNyS_Oeo

MACS · Jun 2, 2023

What did I do with the Grenadier today?
I did sit in my IG today and thought "where to put the monitor for my trailer camera, where to put my CB-radio?"
Yes, there will be some cable-management shortly.
The rubber bands are keeping my daily paperwork.
The alloy element i just glued, So far OK without any vibrations.
Testing it on my trip to abenteuer-allrad.de
No idea where to mount the CB antenna so far.

emax · Jun 2, 2023

macstech said:
Testing it on my trip to abenteuer-allrad.de

We'll be there Thursday.
What is your plan?

Would like to have a look at your Grenadier.

emax · Jun 2, 2023

"Head Unit" is the INEOS term for the central display. When they talk about a "Head Unit update", they mean the central display.

So I'm guessing that the box pictured is the unit that the display is connected to, which actually contains the inner workings (i.e. the motherboard) of the central display.

Very likely there is also a circuit board directly behind the LCD panel, but that's not what I'm talking about. This board is an integral part of the LCD panel with maybe a few hundred connections and cannot be separated from the LCD due to signal path limitations. And it's hardly possible to run a few hundred wires a meter long from the lower box to the LCD.

MACS · Jun 2, 2023

emax said:
We'll be there Thursday.
What is your plan?

Would like to have a look at your Grenadier.

I pm`t you.

BD1 · Jun 2, 2023

Spjnr said:
So I went to Buzz special vehicles today to get my new wheels and tyres fitted. 285 70 17 general grabber X3s and Braid winrace TView attachment 7814439

Looks great! Please post more pictures if you can. Any rubbing?

AnD3rew · Jun 2, 2023

macstech said:
What did I do with the Grenadier today?
I installed a Kenwood DRV-A501W dashcam on the frontscreen. Used CA-DR1030 cabling.
Easy task, around 45min. Rear cam next after we found more details about the removal of the "aircraft panel" (overhead switch panel)

Start pulling the side panel towards driver and work your way through all the clips & screws.
Route the cable to the fusebox and grab some constant power. (With xtra fuse!)

View attachment 7814431

So we have evidence that the mounting points for the handle are on the LHD available.

View attachment 7814432

Probably first picture of the headunit under the steering wheel

View attachment 7814433

View attachment 7814434

Wow, not a lot of space behind there. Was hoping to find a spot for my UHF body behind there, but going to be tight

AnD3rew · Jun 2, 2023

macstech said:
What did I do with the Grenadier today?
I installed a Kenwood DRV-A501W dashcam on the frontscreen. Used CA-DR1030 cabling.
Easy task, around 45min. Rear cam next after we found more details about the removal of the "aircraft panel" (overhead switch panel)

Start pulling the side panel towards driver and work your way through all the clips & screws.
Route the cable to the fusebox and grab some constant power. (With xtra fuse!)

What’s in this space do you know? Is it a void? Am thinking I may be able to put the UHF body in there?

Spjnr · Jun 2, 2023

NI these

Krabby said:
Very nice! So a little bigger than stock - looks fantastic. Truck can handle the tire increase with no issues? I know it's not a huge jump but you might be the first member to swap for bigger tires (and posted about it)

No these fit without rubbing even at full flex. If anything it drives better, as it slightly lengthens the gears. The diesel is so torquey there's no loss of power at all, earlier I was driving home at 1300rpm in 7th gear doing 35mpg!

Spjnr · Jun 2, 2023

BD1 said:
Looks great! Please post more pictures if you can. Any rubbing?

Will do tomorrow. I know Buzz are going to have a lot of pics up on their socials

DaBull · Jun 2, 2023

macstech said:
What did I do with the Grenadier today?
I installed a Kenwood DRV-A501W dashcam on the frontscreen. Used CA-DR1030 cabling.
Easy task, around 45min. Rear cam next after we found more details about the removal of the "aircraft panel" (overhead switch panel)

Start pulling the side panel towards driver and work your way through all the clips & screws.
Route the cable to the fusebox and grab some constant power. (With xtra fuse!)

View attachment 7814431

So we have evidence that the mounting points for the handle are on the LHD available.

View attachment 7814432

Probably first picture of the headunit under the steering wheel

View attachment 7814433

View attachment 7814434

Hi Macstech, Can you give a bit more information on where the fuse box was located and any fuse position number where you connect
up the dashcam. Also, has anyone located the amplifier yet for the sound system or does anyone know if it part of that large silver
head unit below the steering column. Either way, it would also be great to get any manufacture info and part numbers off of it.
Need to know as I will be upgrading my standard sound system once I get my Grenadier. Having more information would be great.
If anyone else upgrades their system, please post details and photos. DaBull

Krabby · Jun 2, 2023

DaBull said:
Hi Macstech, Can you give a bit more information on where the fuse box was located and any fuse position number where you connect
up the dashcam. Also, has anyone located the amplifier yet for the sound system or does anyone know if it part of that large silver
head unit below the steering column. Either way, it would also be great to get any manufacture info and part numbers off of it.
Need to know as I will be upgrading my standard sound system once I get my Grenadier. Having more information would be great.
If anyone else upgrades their system, please post details and photos. DaBull

+1

MACS · Jun 2, 2023

DaBull said:
Hi Macstech, Can you give a bit more information on where the fuse box was located and any fuse position number where you connect
up the dashcam.

will do if time allows. Many things you find easy once your car arrived.

Search

Search

What did you do with your Grenadier today?

Spjnr

Wilaspira

Krabby

Global Grenadier 76

Krabby

Global Grenadier 76

emax

Photo Contest Winner

MACS

Jean Mercier

GG#920

DaveB

MACS

emax

Photo Contest Winner

emax

Photo Contest Winner

MACS

BD1

AnD3rew

Inch deep and a mile wide.

AnD3rew

Inch deep and a mile wide.

Spjnr

Spjnr

DaBull

Krabby

Global Grenadier 76

MACS

Similar threads

Latest posts

Share this page