Has anyone added a towing hitch after?

[FieldMonster]

Which dealer was this out of interest? So far I'm getting a firm no from the ones I speak to.

Harwoods, Portsmouth. They were very helpful.

 

[CloudVisual]

Harwoods, Portsmouth. They were very helpful.

Interestingly, I had mine in for a warranty issue fix and they said the module for towing was installed and couldn't see why the OEM towing electrics couldn't be installed. When changing the module it caused the TSA to disable, which surely shouldn't exist on a model which hasn't had to programmed at the factory (I'm guessing here).

Either way, I may give them a call. Do you happen to know if this work was done solely by them or did they call in Buzz Overland to do the work?

 

[CRH]

Harwoods, Portsmouth. They were very helpful.

I was told it's approx £4000 from my dealer, is that about right, seems a bit steep??

 

[Eric]

I was told it's approx £4000 from my dealer, is that about right, seems a bit steep??

Very, I'm sure if spec'ed at build it was a circa £650 option

 

[Back in Black]

I was told it's approx £4000 from my dealer, is that about right, seems a bit steep??

I asked my dealer here and they said the factory hitch would be about $3000 to install. They also quoted their own aftermarket hitch install @ $884 as a better option. I decided to order a new hitch from CAtuned - cost me $305, including shipping - which should be here Friday. I'll have to deal with the wiring harness later. So it seems like the factory option is ridiculous, by a lot, after the fact!

 

[anand]

I asked my dealer here and they said the factory hitch would be about $3000 to install. They also quoted their own aftermarket hitch install @ $884 as a better option. I decided to order a new hitch from CAtuned - cost me $305, including shipping - which should be here Friday. I'll have to deal with the wiring harness later. So it seems like the factory option is ridiculous, by a lot, after the fact!

Just remember that CATuned's hitch isn't rated for towing...

edit: Also the bulk of the "OEM" implementation after the fact is the cost of the TRM (the towing module that interfaces with all the other electronics on the vehicle) and the wiring

 

[Back in Black]

Just remember that CATuned's hitch isn't rated for towing...

edit: Also the bulk of the "OEM" implementation after the fact is the cost of the TRM (the towing module that interfaces with all the other electronics on the vehicle) and the wiring

What makes you say that? The website states it's for towing. It doesn't look any different from other hitches I've had in the past. I don't really do much so I'm certainly no expert. I only need the capability to tow a light duty trailer (dump runs, etc.) and it appears to be adequate for that application. Is there something I'm missing?

 

[Oscar3rd]

What makes you say that? The website states it's for towing. It doesn't look any different from other hitches I've had in the past. I don't really do much so I'm certainly no expert. I only need the capability to tow a light duty trailer (dump runs, etc.) and it appears to be adequate for that application. Is there something I'm missing?

I can accommodate you with hitch and bolts. 375.00 plus freight and tax

 

[Back in Black]

I can accommodate you with hitch and bolts. 375.00 plus freight and tax

Thanks. I can see where this hitch appears to be more robust. What is the thickness of the steel?

 

[anand]

What makes you say that? The website states it's for towing. It doesn't look any different from other hitches I've had in the past. I don't really do much so I'm certainly no expert. I only need the capability to tow a light duty trailer (dump runs, etc.) and it appears to be adequate for that application. Is there something I'm missing?

Their disclaimer states:

"CAtuned Off-Road assumes no liability for damages, accidents, or any other incidents that may result from using this hitch receiver for towing purposes. Please be aware that load and pull testing have not been conducted on this product."

The only hitch that has actually been certified (to my knowledge) for towing is the OEM unit, which is not too dissimilar in price

 

[Oscar3rd]

I can accommodate you with hitch and bolts. 375.00 plus freight and tax

Thanks. I can see where this hitch appears to be more robust. What is the thickness of the steel?

It is comprised of 1/2 mounting plate, with 1/4 gussets. Our hitches are magnafluxed and x-rayed for defects prior to paint. Insured.

 

[Oscar3rd]

It is comprised of 1/2 mounting plate, with 1/4 gussets. Our hitches are magnafluxed and x-rayed for defects prior to paint. Insured..

Mossy INEOS in Houston, Texas is keeping a couple on the shelf, they are out at the moment, I will be dropping a couple more of them off this week or you can order directly from me.
361-319-5434 phone or text
Marty Israel

Thanks!

 

[Back in Black]

Mossy INEOS in Houston, Texas is keeping a couple on the shelf, they are out at the moment, I will be dropping a couple more of them off this week or you can order directly from me.
361-319-5434 phone or text
Marty Israel

Thanks!

Thanks Oscar3rd. I'll have to give it some thought.

 

[Back in Black]

Their disclaimer states:

"CAtuned Off-Road assumes no liability for damages, accidents, or any other incidents that may result from using this hitch receiver for towing purposes. Please be aware that load and pull testing have not been conducted on this product."

The only hitch that has actually been certified (to my knowledge) for towing is the OEM unit, which is not too dissimilar in price

Thanks anand. I will ponder on this.