Am looking to replace my factory winch line. Not sure if I need to try to buy directly from Red Winches, or can use any aftermarket line I want as long as its the correctly length.
Hello Eveyrone,
If I want to increase the tire size but keep the factory 17" steel wheels, what is the maximum tire size that I can go to?
Kindly advise. Thank you. Mark
I picked up a set of factory side steps for my Trailmaster and have a bit of a problem. It seems the threaded holes have some sort of undercoating in them.
My problem is I don’t know the size of the bolts for the front holes. I take it that they are either M10 or M12’s, I have the taps where I...
Hi We bought our Grenny last year. love it. We've visited the Windhoek and Cape Town dealers and would love to visit the factory. We're heading for hambach on Tuesday. does anyone know if we can visit the factory?
I always get my vehicles ceramic coated and paint corrected. Has anyone noticed imperfections in the factory paint finish?
Here are some images and video of my field master that my Detailer sent me yesterday - Donny metallic Grey over gray black interior.
I’m curious about everyone’s opinion on here about the factory service intervals. 12,000 miles seems like a LONG time to me to be running the same oil - synthetic or not. On the flip side calling for differential services at 12,000 miles seems out there as well! The conspiracy side of me says...
I have the factory Rhino roof rack platform and recently purchased the Bush Company XT Max awning. Unfortunately the brackets that come with it wont work, and my google skills to find an alternate from a third party have failed me. Most third party are the same dimensions as supplied with the...
Has anyone replaced the rope on the factory winch rope? Mine got jammed on an angle pull moving a tree, and chewed the rope up.
It looks like I could perhaps remove the fairlead to gain sufficient access.... does anyone know if nuts behind the hex bolts are captive?
I read on Instagram from a poster that at the Goodwood Festival that Le Tech made an announcement that you can have their products factory direct when building out your IG.
Anyone here this?
Ive had my Grenadier for 5 months and I am getting letters in the mail telling me my Factory Warranty is expiring and I need to call them. The first one was a big pink post card and almost certainly was a scam. The 2nd letter is much more official looking, but again im suspecting its a scam...
So I ordered my Grenadier with a hitch receiver. And as everybody is aware Ineos left them off the first delivered vehicles due to some software issue.
I was also supposed to be dealing Kuhn Automotive in the Bay Area, and at that the last minute something changed and they moved my order to...
I think if you lifted the vehicle, you likely already found you might want a step. Even if you don't, perhaps you are married to someone 5'3" who is not entirely pleased with the climb. The factory rock sliders do not work as a step.
I would say the best choice is aftermarket rock sliders, and...
Do we know the location of the harness plug/connector when adding the JBL Nano as DIY install?
I have the aux battery but the stock head unit has zero oomph so considering adding the JLB Nano.
Hey, folks.
I was hoping someone with the factory full rhino rack could chime in here.
I need the measurements from the top front (top of the bar closest to the engine) down to the roof. I know the roof sort of angles downwards but I’ve been unable to find the measurements for it and the...
Reaching the point where I need to finalize my configuration and spec.
Currently have an Inky Black Trialmaster w/locking diffs/winch safari windows and 18" steel wheels on order.
My off-road use will be "mild" by some standards. No Moab trips planned or overlanding, more like sloppy secondary...
We just put up our latest video which deals with rigging the factory winch so that you are able to use it. We show the Red Winch recommended set up as well as the alternative we chose which is the Factor 55 Flat Link E. Both set ups would work and the craftsmanship of both Red Winch and Factor...
5 wheels removed from the grenadier upon purchase. Vehicle was the first to be lifted with Eibach US spec prototype kit and put on different wheels and bigger tires. Factory tires were sold already. The rims are now up for sale for anyone that prefers the classic look of the old school steel...
I had a local welder fabricate some nerf bars/steps for the factory rock sliders. I had something similar on my LR4 and really missed having the step on the Ineos sliders.
After preparing/cleaning the bare metal I just painted them with a few coats of primer and rustoleum paint. I painted...
Good morning all
Wondering if anyone has any information about the factory load ratings of the 17" Alloy rims or any of the rims specifically offered from factory. Currently in the process of analysing the rear housing for an axle load rating increase for GVM purposes and cannot find any...
Selling my factory steel wheels and BFG KO2’s. Swapped out to Reikas and Toyo RT trails. The wheels and tires have less than 500 miles on them. They’re premounted and balanced but do not have tpms in them selling all 5 for $2000.00.
Greetings!
i’ve been following the IG for a couple of years and had been reading articles and watching videos.
After seeing a Grenadier in person for the first time at SEMA in Vegas a few weeks ago I was convinced one was for me!
I did a test drive with my local dealer yesterday and have been...
Hello everyone, just sharing how i modifed my rock sliders to work as a step. I have extended mine out by 40mm and covered with checkerplate which will be powder coated black in the new year.
We are now offering this modification service to our clients in Melbourne. And full replacement...
I’m due to take delivery of my trialmaster in the next few weeks and was wondering whether anyone can advise what outlets the auxiliary battery fitted as standard in the trialmaster provides power to, if at all?
View: https://www.youtube.com/watch?v=h1i77b0TSM8
Making the IG in Hambach. Hadn't seen this on here before - apologies if already uploaded to the forum elsewhere (I did try a search!)
I'm curious if anyone has seen this in person during their IG test drives or deliveries. I'm not asking for the whole rim cover but just enough for the hub itself and maybe the around the lugs. Something like the picture below for reference. I'm liking the steel wheel look but I'd enjoy it more...
Along with the majority on this excellent Forum, I am eagerly awaiting my Grenadier.
I believe that what Ineos Automotive has achieved in a relatively short space of time is truly amazing and the Grenadier is without doubt a brilliant piece of design and engineering that has been brought...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
