I’ve been trying to find a rigid cargo storage bin with a lid that would fit up behind the back seats in the cargo area.
Something vertically short and as long as it can be, but not deep — with the goal being it could always live there without really being in the way of using the cargo area...
I need more cargo storage. I used to carry emergency/recovery gear and a set of tools in the covered bed when I had a pickup. Rarely needed that gear but when I did.. I was glad I had it. I guess I also need to find a way to carry a scissor jack too.
I've installed a Leitner roof rack, Now...
I love the idea of a Weathertech mat for my vehicles but have always been a little disappointed in the way they fit my Ford SUV company cars. Finding little or nothing avaliable in a durable material that suited my Trialmaster I ordered one last week and put it in today. I am beyond impressed...
I’ve read some threads about this topic but wanted to see if there’s anything new out there I should consider for cargo area. I have the dealer floor mats but forgot about cargo. Anyone recommend cargo liner from dealer?
The other thing I’m finding in my search is the “full coverage” option...
I saw these side organization bins for sale on the great Amazon at $300 per side or $600 for both sides. Has anybody bought these and are they good value?
Thanks
Jeff
I looked up this topic but it appeared to be indeterminate regarding if they were from a prototype and not a production truck.
I’m looking at building a drawer system for my new Trialmaster and while I wait, I was hoping to get some dimensions.
My attached sketches are what I was looking...
The plastic in the rear of the cargo bed seems to scar easily. Anyone try using spray-on bedliner on the plastic to make it more abrasion resistant?
Thinking about applying it to the wheel well plastic area.
I removed the factory rail system in the rear of the IG to fit a big country drawer system. Problem I have is that I don’t know what I’ve done with the bolts from the rails d’oh!
Could anyone show me one of the bolts please? I can find them in my ‘bolt bin’ then 😅
( I know any bolt of the right...
Hi,
I'm trying to unlock slider or find a longer rail.
If the seat is set at the highest point you still have around 10 cm / 4" to gain.
At the lowest point you have 20cm / 8" to gain
--> From 205cm / 80.7" you'll be able to go a little more than 215cm / 84.6"
I would also love to have the...
Hello,
I installed the following items from Bison Gear, the quality is great, very good price and easy to install 👍🏻
- Side table / Tailgate Table (the best part you don’t have to remove the original door cover and worry where to put the first aid kit).
- Roof Shelf / Cargo Shelf
- Folding...
I have to store everything I need for working in remote locations. I run light because there’s always a fully equipped crew onsite before I arrive. I wanted something cheap, easy to remove, durable. So I built my shelf from two adjustable shower curtain rods that fort into the rear pockets...
Hi,
Has anyone come across great cargo shelf options that sit at the window line of the trunk? I’m looking for something that will act as both a cargo shelf and good way to hide what’s in the trunk.
Diabolical has a shelf option, but it looks like it sits higher than the window line. Either a...
I am looking for the dimensions below if anyone has it please. L-track width, pitch and hole diameter.
They are a number of different aftermarket sizes and pitches, so just want o to make sure I buy the correct one.
Hi All,
Just a message to say we have made a batch of the cargo shelves.
First batch of 10 is here. Just waiting to make up the bolt kits.
01299250174 to get in touch.
Shameless plug.
I have 4 cargo shelves left for any owners in Perth.
$400 incl fasteners.
It’s a 3mm aluminium one-piece tray, so much heftier than “other” 2mm flat pack ones.
Bolts into existing holes in the back of the car. Literally a 10min installation.
1330mm wide
440mm deep
190mm base...
Hey there,
I've seen a few photos where is looks like folks have a really nice cargo liner / system that goes up the side wall as well as the back of the seats for the cargo area of the Grenadier, specifically for dogs. I have something like this through Canvasback for my Rubicon, but can't...
I have a contact at Decked who says they might consider making a kit for the Grenadier if they could access a vehicle to 3D scan. Anyone near Sun Valley/Ketchum up for a visit? I can put you in touch if you're interested.
Someone had mentioned this on one of the calls, but hadn't experienced it until today. Small leak that went down the inside of the passenger side cargo area window. Went the whole height, didn't get a pic. Nothing seems wet in the cargo area, but could be behind the trim panels. Interior...
I picked up 8 collapsible crates that fit perfectly in the cargo load space:
They are crate that are accessible from the side, so you don’t need to remove them to access the bottom crates:
Then, when the crates are collapsed, they are the perfect height to level the cargo area when the seats...
Is it possible to source any of these items to the USA?
I can't seem to get a straight answer if the Cargo Barrier and the Cargo Divider will be available to purchase as an accessory in the US.
and
Not sure if anyone has had success ordering Letech products into the US.
Any help or alternate...
Informer to resolve swiftly the shortage of offroad fuel range I mount 2x20L jerry cans on rear window. I made a copy of M.O.L.L.E. us army so you can easily clip on their asesories. I make this in local workshop in Dubai at Ironman 4x4, they can make this quickly and cost efficient.
I sketched up a rear cargo shelf and had it laser cut, bent and powder coated.
Looks great, so thought I'd share the cad file for anyone that is so inclined. Sorry about the .zip, it wouldn't let me upload a .dwg
Most sheet metal shops could make it happen for you by sending them the cad file...
Cargo Barrier - Help Wanted Please - I tried to move the cargo barrier to the position behind the front row of seats rather than the back row which is how it is delivered. It won't fit. The dealer is telling me that it is not intended to be there. However, there are the same mounting points on...
If anyone bought the Grenadier Cargo net... does it require the Utility Rails and Quick Release Tie Down Rings to mount it?
If anyone has a clear photo of theirs installed, can You can post it here? The website picture is so small that I can't see any details of it.
Thanks.
Does anyone have a review, pictures or thoughts on this combination? We had a similar setup in our Volvo Wagon and it worked great to keep the dog separate from our luggage.
Does anyone know the dimensions of the cargo area
1. Back of second row to tail gate
2. Distance between the tire wells
3. Height of tire wells
4. Distance side to side above tire wells
Trying to have a drawer system built for Grenadier
Rob
Today, I installed my boot rubber mat.
A trivial job, but I'll share my work anyway.
Why:
I have a utility with a dark grey liner in the boot. Right after the first transport of an 8 Kg "Böller" (saluting gun) the liner had the first ugly scratches, although I had strapped the thing quite...
Hi all,
i wanna use the attachment point of the load compartment grille (cargo barriers) right behind the front seats. I wanna add hooks there for my camping bed. Does anyone know how to use those points? Since I don't have the load compartment grille i can just guess how it works.
thanks in...
More pictures taken today at the Autohaus Weippert lot. This time from the QM tonneau cover, interesstingly combined with some cargo racks. Might be useful for a (second) tent.
Max
Forgive my ignorance, but do the European Grenadiers get this sticker on the driver's side door jamb? I was wondering what cargo capacity people were seeing. I was cross shopping the Ineos with various other options, this is a sticker from a 2021 Land Rover Defender 110 X-Dynamic SE. My travel...
The slide out kitchens are really cool, but is there a reason why they aren’t fully removeable and stand-alone? Most don’t even seem to have legs to help support them? Is there some reason for this? It seems that the same set ups on some kind of ambulance gurnee leg/wheel system would be...
Hello everyone ,
Was looking to see if the hive mind has any ideas . I usually keep in my trunk / boot ( depending who you are talking to ) a 24h car bag , compressor , valve stems , patch kit , ratchet straps etc …. . Up to now all my cars had some sort of cover so you would not be able to...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.