The Grenadier Forum
Register Now for enhanced site access.
INEOS Agents, Dealers or Commercial vendors please contact admin@theineosforum.com for a commercial account.

DVA Mechanics

DVA Mechanics

Grenadier Owner
Supporting Vendor
Local time
2:20 PM
Joined
Jan 10, 2024
Messages
68
Reaction score
93
Location
Atlanta, GA, USA
Can we get a pic from further back? I'm wondering how far outside the "side wall" does the mini stick out after installation. Anything past the roof gutter would be no bueno for me since I want to use it in motion, and this looks way past it.
We finally got our Mini back! Here’s a photo that shows it exactly.
 

Attachments

  • IMG_8048.jpeg
    IMG_8048.jpeg
    1.4 MB · Views: 57

DVA Mechanics

Grenadier Owner
Supporting Vendor
Local time
2:20 PM
Joined
Jan 10, 2024
Messages
68
Reaction score
93
Location
Atlanta, GA, USA
Enhancing Your Ineos Grenadier: Mounting Traction Boards to the Rear Ladder Accessory Carrier


Embarking on off-road adventures with your Ineos Grenadier is all about preparation and adaptability. One essential upgrade that can significantly enhance your vehicle’s performance and versatility is the installation of traction boards onto the rear ladder accessory carrier. Here’s an inside look at how this modification can transform your driving experience.
 

Attachments

  • Recovery Board Side View Medium.jpeg
    Recovery Board Side View Medium.jpeg
    117.3 KB · Views: 34
  • Traction Plate Listing 6 Medium.jpeg
    Traction Plate Listing 6 Medium.jpeg
    103.9 KB · Views: 25
  • Traction Bar Listing 5 Medium.jpeg
    Traction Bar Listing 5 Medium.jpeg
    90 KB · Views: 24
  • Traction Bar Listing 3 Medium.jpeg
    Traction Bar Listing 3 Medium.jpeg
    95.5 KB · Views: 22
  • Traction Bar Listing 2 Medium.jpeg
    Traction Bar Listing 2 Medium.jpeg
    91.6 KB · Views: 23
  • IMG_8133 Medium.jpeg
    IMG_8133 Medium.jpeg
    119.2 KB · Views: 30
  • Like
Reactions: PBD

DVA Mechanics

Grenadier Owner
Supporting Vendor
Local time
2:20 PM
Joined
Jan 10, 2024
Messages
68
Reaction score
93
Location
Atlanta, GA, USA
**Customer Photos**

A customer shared stunning photos of their build, featuring a blue Jerry Can mounted on DVA Mechanics side accessory carrier, perfectly matching their beautiful blue Ineos Grenadier with a factory Rhino Roof Rack. We love seeing our products in action!

www.dvamechanics.com

#DVAMechanics #IneosGrenadier #OverlandLife #AdventureReady #JerryCan #OffRoadAccessories #VehicleMods #OutdoorGear #AdventureSetup #BuiltNotBought
 

Attachments

  • IMG_8162.jpeg
    IMG_8162.jpeg
    49.9 KB · Views: 20
  • IMG_8161.jpeg
    IMG_8161.jpeg
    47.3 KB · Views: 18
  • IMG_8160.jpeg
    IMG_8160.jpeg
    139.3 KB · Views: 17
  • IMG_8159.jpeg
    IMG_8159.jpeg
    74.6 KB · Views: 17
  • IMG_8158.jpeg
    IMG_8158.jpeg
    136.3 KB · Views: 16
  • IMG_8157.jpeg
    IMG_8157.jpeg
    62.6 KB · Views: 15
  • IMG_8156.jpeg
    IMG_8156.jpeg
    128.8 KB · Views: 16
  • IMG_8155.jpeg
    IMG_8155.jpeg
    126.1 KB · Views: 17
  • IMG_8154.jpeg
    IMG_8154.jpeg
    127.3 KB · Views: 15
  • IMG_8153.jpeg
    IMG_8153.jpeg
    119.6 KB · Views: 16
  • IMG_8163.jpeg
    IMG_8163.jpeg
    55.9 KB · Views: 18
  • IMG_8153.jpeg
    IMG_8153.jpeg
    119.6 KB · Views: 14
  • IMG_8154.jpeg
    IMG_8154.jpeg
    127.3 KB · Views: 13
  • IMG_8156.jpeg
    IMG_8156.jpeg
    128.8 KB · Views: 12
  • IMG_8163.jpeg
    IMG_8163.jpeg
    55.9 KB · Views: 12
  • IMG_8162.jpeg
    IMG_8162.jpeg
    49.9 KB · Views: 12
  • IMG_8161.jpeg
    IMG_8161.jpeg
    47.3 KB · Views: 12
  • IMG_8160.jpeg
    IMG_8160.jpeg
    139.3 KB · Views: 10
  • IMG_8159.jpeg
    IMG_8159.jpeg
    74.6 KB · Views: 10
  • IMG_8158.jpeg
    IMG_8158.jpeg
    136.3 KB · Views: 8
  • IMG_8157.jpeg
    IMG_8157.jpeg
    62.6 KB · Views: 8
  • IMG_8156.jpeg
    IMG_8156.jpeg
    128.8 KB · Views: 7
  • IMG_8155.jpeg
    IMG_8155.jpeg
    126.1 KB · Views: 17

MrMike

Lifetime Supporter
Local time
3:20 AM
Joined
Nov 25, 2022
Messages
1,659
Reaction score
2,487
Location
Australia
**Customer Photos**

A customer shared stunning photos of their build, featuring a blue Jerry Can mounted on DVA Mechanics side accessory carrier, perfectly matching their beautiful blue Ineos Grenadier with a factory Rhino Roof Rack. We love seeing our products in action!

www.dvamechanics.com

#DVAMechanics #IneosGrenadier #OverlandLife #AdventureReady #JerryCan #OffRoadAccessories #VehicleMods #OutdoorGear #AdventureSetup #BuiltNotBought
How does the side mount go for lateral movement?
 

parb

Grenadier Owner
Lifetime Supporter
Local time
11:20 AM
Joined
Sep 10, 2023
Messages
983
Reaction score
1,456
Location
Silicon Valley, CA, USA
I got my rear ladder mount for hi-lift jacks.
Really easy to install (i put in a few drops of vibra-tite before sealing it up.

The thread for the mount to the hi-lift is M8 course. I used a bolt, put some 1 1/4 inch rubber washers between the mount and the jack, a flat washer and a lock washer before i tightened it up. When the jack is attached its super solid. When its only one attachement point, it rotates a bit. But overall i'm very happy with the mount. Good purchase and i think its very robust.

PXL_20241116_224954787.jpg


You can see here that i used too long screws. The hardware store was out of the size i wanted (35mm long) and i had to use M8 x 45mm.
PXL_20241116_225003445.jpg

PXL_20241116_224959743.jpg
 

DVA Mechanics

Grenadier Owner
Supporting Vendor
Local time
2:20 PM
Joined
Jan 10, 2024
Messages
68
Reaction score
93
Location
Atlanta, GA, USA
I got my rear ladder mount for hi-lift jacks.
Really easy to install (i put in a few drops of vibra-tite before sealing it up.

The thread for the mount to the hi-lift is M8 course. I used a bolt, put some 1 1/4 inch rubber washers between the mount and the jack, a flat washer and a lock washer before i tightened it up. When the jack is attached its super solid. When its only one attachement point, it rotates a bit. But overall i'm very happy with the mount. Good purchase and i think its very robust.

View attachment 7877760

You can see here that i used too long screws. The hardware store was out of the size i wanted (35mm long) and i had to use M8 x 45mm.
View attachment 7877761
View attachment 7877762
That looks Amazing!

So happy with your experience! It looks amazing!
 
Last edited:

DVA Mechanics

Grenadier Owner
Supporting Vendor
Local time
2:20 PM
Joined
Jan 10, 2024
Messages
68
Reaction score
93
Location
Atlanta, GA, USA
I got my rear ladder mount for hi-lift jacks.
Really easy to install (i put in a few drops of vibra-tite before sealing it up.

The thread for the mount to the hi-lift is M8 course. I used a bolt, put some 1 1/4 inch rubber washers between the mount and the jack, a flat washer and a lock washer before i tightened it up. When the jack is attached its super solid. When its only one attachement point, it rotates a bit. But overall i'm very happy with the mount. Good purchase and i think its very robust.

View attachment 7877760

You can see here that i used too long screws. The hardware store was out of the size i wanted (35mm long) and i had to use M8 x 45mm.
View attachment 7877761
View attachment 7877762
Would you mind if we posted your photos on our social media? :). Thanks!
 
Back
Top Bottom