Speedo and Driver Display Modification Ideas

PetrK · Dec 16, 2023

MrMike said:
Most have mentioned the rear camera display as inadequate and by now IA should be full aware that this is lacking and should be rectified. As to the display, not many have said this, but many warnings are there so not viewing this could potentially be dangerous

therefore, the solution would be to make a new HUD or instrument cluster with LCD. Small but fully functional. With brightness control

.
Well, we also have other problems here... heating, steering, absence of sport or towning mode, low engine speed..., really high diesel consumption with a tow of 16.5l/100km,
microphone turning off with shutdown +30 on the key after about 30 seconds. Slow communication between units...But I believe that we will solve something. and something IA.
Merry Christmas everyone
PetrK

[ Adam ] · Dec 16, 2023

PetrK said:
Hello,
When the HUD is supplemented with a speedometer, it could be possible to turn off the large display completely. Personally, I am bothered by the too high intensity of both chapels when driving. And the impossibility of automatic brightness reduction during night/day lighting. Only one brightness setting is insufficient. The outside temperature is very important before the steering wheel. It's tiring to constantly look to the side. Also the rear camera display size is funny. the resolution of the central screen is perfect. So why is the reversing camera not over the full screen area? The rear camera would be better placed in the axis of the towing device.

Because I'm sure that by law, some information (like your speed) must be displayed at all times, even when in reverse.

alexandruast · Apr 14, 2024

Using a Scangauge II for this purpose

Jörk · Oct 5, 2024

PetrK said:
Hello,
When the HUD is supplemented with a speedometer, it could be possible to turn off the large display completely. Personally, I am bothered by the too high intensity of both chapels when driving. And the impossibility of automatic brightness reduction during night/day lighting. Only one brightness setting is insufficient. The outside temperature is very important before the steering wheel. It's tiring to constantly look to the side. Also the rear camera display size is funny. the resolution of the central screen is perfect. So why is the reversing camera not over the full screen area? The rear camera would be better placed in the axis of the towing device.

Hi PetrK
You can adjust the brightness for day and nighttime separate.
If you switch off the lights and adjust then the brightness, you have adjusted the brightness without the lights ( daytime). Then you switch on the lights and adjust the brightness for Nighttime.

Jörk · Oct 5, 2024

Jörk said:
Hi PetrK
You can adjust the brightness for day and nighttime separate.
If you switch off the lights and adjust then the brightness, you have adjusted the brightness without the lights ( daytime). Then you switch on the lights and adjust the brightness for Nighttime.

Lights=headlight

IslandFalconer · Oct 6, 2024

I’d happily buy one if I could disable all the useless lights. That would be worth it.

Search

Search

Speedo and Driver Display Modification Ideas

PetrK

[ Adam ]

Photo Contest Winner

alexandruast

Jörk

Jörk

IslandFalconer

Similar threads

Latest posts

Share this page