Americas Picture Requests or Measurements?

Lemon35 · Dec 18, 2023

I'll be picking up my TM on Wednesday and plan to have it on a 4 post lift Thursday or Friday for a proper inspection. My dealer did get a laugh at me just diving under the Dealer Demo a couple months ago...

I've have my camera, a pair of calipers, and a measuring tape handy. I do not have a scan tool for 3D modeling etc.

If anyone has requests for pictures or measurements please post it here and I'll reply with whatever I can dig up. High time I started contributing to the forum that has given me plenty of data and entertainment.

Solmanic · Dec 18, 2023

Remember, the rest of us in the developed world only speak metric.

Krabby · Dec 18, 2023

Solmanic said:
Remember, the rest of us in the developed world only speak metric.

Always insulting Liberia. Tsk tsk tsk.

DaBull · Dec 18, 2023

Lemon35 said:
I'll be picking up my TM on Wednesday and plan to have it on a 4 post lift Thursday or Friday for a proper inspection. My dealer did get a laugh at me just diving under the Dealer Demo a couple months ago...

I've have my camera, a pair of calipers, and a measuring tape handy. I do not have a scan tool for 3D modeling etc.

If anyone has requests for pictures or measurements please post it here and I'll reply with whatever I can dig up. High time I started contributing to the forum that has given me plenty of data and entertainment.

Hi Lemon35, Tentative Congratulations! Did you get side steps or rock sliders? DaBull

Xrford · Dec 19, 2023

@Lemon35 A Pic of your payload sticker and list of your factory installed options would be helpful. thanks

Lemon35 · Dec 19, 2023

DaBull said:
Hi Lemon35, Tentative Congratulations! Did you get side steps or rock sliders? DaBull

I optioned neither for many of the same reasons others here have highlighted. Factory rock sliders didn't help with ingress and side steps seemed low in my opinion.

I'll wait for an aftermarket solution.

Lemon35 · Dec 19, 2023

Xrford said:
@Lemon35 A Pic of your payload sticker and list of your factory installed options would be helpful. thanks

Planning to get on a truck scale empty as well.

Lemon35 · Dec 22, 2023

Xrford said:
@Lemon35 A Pic of your payload sticker and list of your factory installed options would be helpful. thanks

Updated my signature block to show my vehicle specs for all posts going forward.

Xrford · Dec 22, 2023

Lemon35 said:
View attachment 7836766
Updated my signature block to show my vehicle specs for all posts going forward.

Thank you very much…. congratulations on your new Grenadier!

Lemon35 · Dec 23, 2023

Got on the lift and I'm seriously impressed. Took tons of pictures in case I break something and need a reference. Older gentlemen in the shop were at max curiosity once they saw it, and went right under with me for the look. It quickly gained the nod and thumbs up from them - and they waived my lift fee altogether

. Lots of onlookers walking by throughout the 30 minutes I had it up.

Couple pictures below with notes. Steering damper location for US Spec RHD, with the clearance and proper tire placement that downward bolt head shouldn't be an issue but could be a contact point.

No rubbing cables or wires. Everything tucked nicely out of the way and in fixtures along the frame.

Neutral engagement bolt on the transmission/Transfer case housing. Its further back than expected (just my mind) but good to know the exact location before you ever need it.

Below picture is behind the radiator fan. You can see the serpentine belts on the front of the block for reference. I'm thinking this unused clip would actually be for the power source to the winch if optioned?

Jean Mercier · Dec 23, 2023

Lemon35 said:
I'm thinking this unused clip would actually be for the power source to the winch if optioned?

Well, FYI (For Your Information

) the answer is "no", I have the same unused clip, and I have a winch.
Picture was taken in June from top to bottom (reverse view compared to yours).

SkiBum1 · Dec 24, 2023

How many inches tall is the ineos without the factory roof rack and with the factory roof rack, if you know it? In inches if you know it. Thank you

Lemon35 · Dec 24, 2023

SkiBum1 said:
How many inches tall is the ineos without the factory roof rack and with the factory roof rack, if you know it? In inches if you know it. Thank you

I haven't measured that exactly... however I did measure my garage door at a perfect 7 Feet (84inches).

The morning after I took delivery, my friend and neighbor came over to help guide me into the garage for the first time. Side contact wasn't the concern it was clearance to the door. My best guess is those roof load strips are 82 inches high off the ground at recommended PSI.

IF I ever pull in with the safari windows popped up, they are TOAST.

SkiBum1 · Dec 24, 2023

Lemon35 said:
I haven't measured that exactly... however I did measure my garage door at a perfect 7 Feet (84inches).

The morning after I took delivery, my friend and neighbor came over to help guide me into the garage for the first time. Side contact wasn't the concern it was clearance to the door. My best guess is those roof load strips are 82 inches high off the ground at recommended PSI.
View attachment 7836949

IF I ever pull in with the safari windows popped up, they are TOAST.

Thank you. That is exactly what I needed. My door is 7’2” so I am good to go! Appreciate it.

DaBull · Dec 24, 2023

SkiBum1 said:
How many inches tall is the ineos without the factory roof rack and with the factory roof rack, if you know it? In inches if you know it. Thank you

Hi SkiBum1, Ineos states the following height without and with their Rhino Rack. DaBull

HEIGHT OF GRENADIER 2050 mm = 80.71 inches without any roof rack
HEIGHT OF GRENADIER 2150 MM = 84.65 Inches with the Grenadier Rhino Roof Rack
Since I have a very low garage door opening I am designing super low profile brackets and cross bars for my Grenadier that will only add in total 25.4mm or 1” to the overall height of the Grenadier. With my design, the total height of the Grenadier with the cross bars will only be 2075.4mm or 81.71”. They will be very robust and a great starting point for anyone wanting to turn them into a platform or use them for attaching a roof top tent. DaBull

DenisM · Dec 24, 2023

DaBull said:
Hi SkiBum1, Ineos states the following height without and with their Rhino Rack. DaBull

HEIGHT OF GRENADIER 2050 mm = 80.71 inches without any roof rack
HEIGHT OF GRENADIER 2150 MM = 84.65 Inches with the Grenadier Rhino Roof Rack
Since I have a very low garage door opening I am designing super low profile brackets and cross bars for my Grenadier that will only add in total 25.4mm or 1” to the overall height of the Grenadier. With my design, the total height of the Grenadier with the cross bars will only be 2075.4mm or 81.71”. They will be very robust and a great starting point for anyone wanting to turn them into a platform or use them for attaching a roof top tent. DaBull

Ineos figures are "conservative" in the sense that the height of a Trialmaster diesel, (no additional bullbar or winch) for example is 2023mm at the rear and 40mm less at the B pillar (because the rear springs are unladen).
I've triple checked these because my clearance is 40mm (1 1/2") so I instinctively lower my head as I sneak under my sectional roller garage door

Check out the "Exact Measurements " thread post #62.

[ Adam ] · Dec 24, 2023

DaBull said:
Hi SkiBum1, Ineos states the following height without and with their Rhino Rack. DaBull

HEIGHT OF GRENADIER 2050 mm = 80.71 inches without any roof rack
HEIGHT OF GRENADIER 2150 MM = 84.65 Inches with the Grenadier Rhino Roof Rack
Since I have a very low garage door opening I am designing super low profile brackets and cross bars for my Grenadier that will only add in total 25.4mm or 1” to the overall height of the Grenadier. With my design, the total height of the Grenadier with the cross bars will only be 2075.4mm or 81.71”. They will be very robust and a great starting point for anyone wanting to turn them into a platform or use them for attaching a roof top tent. DaBull

Will these attach to the gutter or the bars?

DaBull · Dec 24, 2023

[ Adam ] said:
Will these attach to the gutter or the bars?

Hi Adam, The low profile brackets would attach to the screws that are holding the existing brackets that hold the aluminum tubes as that appears to be the strongest attachment points. DaBull

SkiBum1 · Dec 24, 2023

DaBull said:
Hi SkiBum1, Ineos states the following height without and with their Rhino Rack. DaBull

HEIGHT OF GRENADIER 2050 mm = 80.71 inches without any roof rack
HEIGHT OF GRENADIER 2150 MM = 84.65 Inches with the Grenadier Rhino Roof Rack
Since I have a very low garage door opening I am designing super low profile brackets and cross bars for my Grenadier that will only add in total 25.4mm or 1” to the overall height of the Grenadier. With my design, the total height of the Grenadier with the cross bars will only be 2075.4mm or 81.71”. They will be very robust and a great starting point for anyone wanting to turn them into a platform or use them for attaching a roof top tent. DaBull

This is really helpful and a relief! My garage opening is 83.5 inches but scraping on the rubber seal of the opening. I am in good shape and almost in with the factory roof rack that I ordered w my build. I would love to see what you are doing to get the roof rack lower and closer to the roof as this may be a long term solution for me vs pulling off the roof rack in the winter and leaving it on only half of the year.

evomind · Dec 24, 2023

Solmanic said:
Remember, the rest of us in the developed world only speak metric.

Yeah but we put guys on the moon.

Search

Search

Americas Picture Requests or Measurements?

Lemon35

Solmanic

Krabby

Global Grenadier 76

DaBull

Xrford

Lemon35

Lemon35

Lemon35

Xrford

Lemon35

Jean Mercier

GG#920

SkiBum1

GG-4567

Lemon35

SkiBum1

GG-4567

DaBull

DenisM

[ Adam ]

Photo Contest Winner

DaBull

SkiBum1

GG-4567

evomind

Latest posts

Share this page