What's new
The Grenadier Forum
Register Now for enhanced site access.
INEOS Agents, Dealers or Commercial vendors please contact admin@theineosforum.com for a commercial account.

Gutters surviving 420kg?

Lollo050968

Lollo050968

Grenadier Owner
Lifetime Supporter
Local time
4:34 AM
Joined
Oct 12, 2022
Messages
605
Reaction score
1,447
Location
Germany
This week I prepared everything to put our new Soft Roof Tent on the Grenadier, Ineos Crossbars are still not delivered, so I bought additional the Thule Crossbars. To be able to mount alone, I installed a electrical 250kg winch the garage. For the gutters I made L-Profile 170x30x15 and 2mm thick. This spread the pressure a little bit better. The screws at the tent have to be changed, the original one are too short for Thule.
I investigate, that the power outlets are not parallel on both sides, therefore I had to change the bars two times. But easy with the winch in the garage.
Now i have to at lockable nuts on the crossbars….
 

Attachments

  • IMG_5411.jpeg
    IMG_5411.jpeg
    159.9 KB · Views: 111
  • IMG_5421.jpeg
    IMG_5421.jpeg
    109.3 KB · Views: 104
  • IMG_5422.jpeg
    IMG_5422.jpeg
    100.6 KB · Views: 103
  • IMG_5423.jpeg
    IMG_5423.jpeg
    77.6 KB · Views: 105
  • IMG_5424.jpeg
    IMG_5424.jpeg
    154.6 KB · Views: 112
DenisM

DenisM

Grenadier Owner
Lifetime Supporter
Local time
1:34 PM
Joined
Jan 26, 2022
Messages
2,197
Reaction score
4,381
Location
Brisbane, Queensland Australia
Lollo050968 said:
This week I prepared everything to put our new Soft Roof Tent on the Grenadier, Ineos Crossbars are still not delivered, so I bought additional the Thule Crossbars. To be able to mount alone, I installed a electrical 250kg winch the garage. For the gutters I made L-Profile 170x30x15 and 2mm thick. This spread the pressure a little bit better. The screws at the tent have to be changed, the original one are too short for Thule.
I investigate, that the power outlets are not parallel on both sides, therefore I had to change the bars two times. But easy with the winch in the garage.
Now i have to at lockable nuts on the crossbars….
Click to expand...
That's a neat solution all around! The electric winch is a great idea!
A closer look at your image # 5422.jpeg seems to show the metal piece which is under the clamp foot has lifted closer to the roof seeming to indicate that the weight plus clamping force is concentrated at the outer edge which is not what you intended.
In thread https://www.theineosforum.com/threa...r-on-the-grab-rails.12412618/#post-1333194716 @Christoph has posted a simple solution (also taken up by @jb_hamon ) using pvc blocks with Thule legs/clamps to move the feet well away from the outer edge of the gutter. You could put this in place in a few minutes: cut the blocks from a thick "plastic" kitchen cutting board (tell the Mrs it's for a good cause! ;-) ) Leave your metal strips in place: with the feet closer to the roof, the weight distribution will be even more effective! "win/win" :)
 
Last edited:
Lollo050968

Lollo050968

Grenadier Owner
Lifetime Supporter
Local time
4:34 AM
Joined
Oct 12, 2022
Messages
605
Reaction score
1,447
Location
Germany
@DenisM No, the gutter surface is not flat inside, to the innerside is a small step of 0.5mm. The longside of the L touch the surface, but caused of the 0.5mm it‘s up in the middle. I will put now some rubber between, to equal the surface. AND have an aluminium bar prepared as spacer, have to cut in pieces in the next days
 
Last edited:
AnD3rew

AnD3rew

Inch deep and a mile wide.
Grenadier Owner
Lifetime Supporter
Local time
2:34 PM
Joined
Aug 24, 2022
Messages
2,436
Reaction score
6,046
Had a good look at the gutters today. They are actually very solid it’s just the sheer width that means with a lot of weight on the edge they will deform just because of the leverage. Any rack leg needs to be able to have the weight sit close to the body
 
Tazzieman

Tazzieman

Grenadier Owner
Lifetime Supporter
Founding Guard
Local time
2:34 PM
Joined
Sep 30, 2021
Messages
6,762
Reaction score
13,394
Location
Tasmania
AnD3rew said:
Had a good look at the gutters today. They are actually very solid it’s just the sheer width that means with a lot of weight on the edge they will deform just because of the leverage. Any rack leg needs to be able to have the weight sit close to the body
Click to expand...
Yes I don't care for the potential for lateral forces induced by some roof bars I've seen.

I don't want to see any movement when I hang violently off them
 
  • Like
Reactions: PBD
Lollo050968

Lollo050968

Grenadier Owner
Lifetime Supporter
Local time
4:34 AM
Joined
Oct 12, 2022
Messages
605
Reaction score
1,447
Location
Germany
Lollo050968 said:
@DenisM No, the gutter surface is not flat inside, to the innerside is a small step of 0.5mm. The longside of the L touch the surface, but caused of the 0.5mm it‘s up in the middle. I will put now some rubber between, to equal the surface. AND have an aluminium bar prepared as spacer, have to cut in pieces in the next days
Click to expand...
So today next step: Spacer in Aluminium and under the L rubber strip .IMG_5449.jpeg
 
Lollo050968

Lollo050968

Grenadier Owner
Lifetime Supporter
Local time
4:34 AM
Joined
Oct 12, 2022
Messages
605
Reaction score
1,447
Location
Germany
Jumped now to the original Rhino Crossbars (delivered monday with the side steps), what can I say: Thule is a toy in comparison. Rhino much more solid and fit perfect in the gutters. Thule was a wrong investment…
IMG_5525.jpeg
IMG_5527.jpeg
 
Deepblue

Deepblue

#00274 - Swiss Vehicle (SD1-1/63)
Grenadier Owner
Lifetime Supporter
Local time
4:34 AM
Joined
Mar 17, 2022
Messages
201
Reaction score
650
Location
Switzerland
Lollo050968 said:
Jumped now to the original Rhino Crossbars (delivered monday with the side steps), what can I say: Thule is a toy in comparison. Rhino much more solid and fit perfect in the gutters. Thule was a wrong investment…View attachment 7823020View attachment 7823021
Click to expand...
Hi @Lollo050968 thank you, very helpful comment. I have some Thule bars as interim solution as the official Rhino ones are not yet available as I had not ordered together with my car. What is the measure of the bar profile? I can’t find this info in the Ineos description.
 
Lollo050968

Lollo050968

Grenadier Owner
Lifetime Supporter
Local time
4:34 AM
Joined
Oct 12, 2022
Messages
605
Reaction score
1,447
Location
Germany
Deepblue said:
Hi @Lollo050968 thank you, very helpful comment. I have some Thule bars as interim solution as the official Rhino ones are not yet available as I had not ordered together with my car. What is the measure of the bar profile? I can’t find this info in the Ineos description.
Click to expand...
110 x 30mm
 
M

Mercurio

Local time
9:34 PM
Joined
Sep 29, 2023
Messages
23
Reaction score
22
Location
Houston, TX, USA
DCPU said:
I guess in the way one might liken it to the Cresta Run. 😉


But several Front Runner racks have been used in official Ineos marketing photos, and Ineos have talked so much about open source info for aftermarket suppliers that to imply that warranty could be voided by using a reputable third party would be rather two faced.
Click to expand...
Is there an answer yet? Will Aftermarket racks/accessories void Ineos’ warranty??
 
K

KDJDGrenadier

Grenadier Owner
Local time
1:34 PM
Joined
Oct 12, 2022
Messages
134
Reaction score
140
Location
Brisbane Australia
Are the ALU-CAB feet available in Australia? Part number ALUIG-LB-FEET. I am thinking those with two crossbars would do what i need it to do.
1721464533113.png
 
Last edited:
You must log in or register to reply here.

Similar threads

Loc Nar
Ram Mount Projects
Replies
2
Views
375
jert
jert
Toot
Starlink Mini Roof Rack Mount - Suggestions / Request for Product
2
Replies
25
Views
808
Toot
Toot
parb
Looking for a reasonable priced hi-lift ladder mount
Replies
12
Views
267
mugsie
M
Bodhi’s Grenadier
CAtuned Offroad side molle panels with rotopax!
Replies
4
Views
833
Bodhi’s Grenadier
Bodhi’s Grenadier
J
Hello, Got my new Trial master last Friday, I am was not disappointed.
Replies
0
Views
89
JCruz
J
Forum Store
The officially unofficial podcast for INEOS Automotive Grenadier Works Podcast
INEOS Grenadier Configurator

Latest posts

Share this page

Back
Top Bottom