Goodridge Brake Hoses

DCPU · Jun 5, 2023

So there was obviously some initial first delivery delays due to brake hoses. I heard two versions of the story why. One was that some had come without the required labels and so for type approval/Certificate of Conformity requirements they needed to swapped out; and secondly due to them being twisted when installed and so not meeting the suppliers installations requirements:

I thought somewhere in the batch and hold, additional QA checks, ALL brake hoses would have been checked. No such luck!

Today I found one of my rear hoses twisted:

With tell tale rubbing on the axle:

DCPU · Jun 5, 2023

It's also worth noting that at the rear there are actually 4 flexible brake hoses - 2 outboard (as per the photo above); and two inboard as per these photos:

Fab · Jun 5, 2023

Hmmm… that can happen but should be changed at the dealer/agent, I think.
Because of warranty issues.
I have never bought a new car before, thus never had warranty issues.
Which meant I could do everything myself.

emax · Jun 5, 2023

Unbelievable. This is Africa level.
Thank you for showing us.

May be I'm a bit picky, but after a (pre-delivery) recall that's simply unacceptable. What will you do?

I'd consider a complaint at the agent. In particular the damaged coating (powder-coated?) of the axle is a bummer - not to talk about the long term impact on the brake hose.

DCPU · Jun 5, 2023

Yes it was the pre-delivery "recall" aspect that really pisses me off - even if it was only supposed to be on the front brakes as per previous photos I've seen; I'd have expected the instruction to say check them all as a matter of course.

I haven't finished going through the full vehicle yet. I have a large galley of photos, and I've shared many of the findings on here - looking to see if others have the issue, it's "normal" or mine is an outlier. I will need to formulate them into an email and fire it across to the agent. It's all fixable. Ideally, I would like to open a dialogue with someone directly at Ineos - I am after all their customer.

emax · Jun 5, 2023

That's the downside (are there upsides?) of the agent model. You can't get your agent by the balls because they just point at INEOS - and INEOS is not tangible.

Tazzieman · Jun 5, 2023

Looks like it was installed on a hoist and therefore malpositioned when let down onto the suspension.
Critical safety issue that one. Everybody should double check.

DCPU · Jun 6, 2023

Tazzieman said:
Looks like it was installed on a hoist and therefore malpositioned when let down onto the suspension.

I don't think there's any relative movement across the two mounting points ~ both effectively fixed to the axle casing.

It just looks like poor installation technique, allowing the hose to twist in the final part of tightening the second union. It's a beginner's mistake if you are generous, but it should not have happened with proper training, and then it should have been picked up at the first QA inspection, and certainly shouldn't have been missed after a Technical Service Bulletin (TSB).

Tazzieman said:
Critical safety issue that one. Everybody should double check.

It's definitely this.

Jörk · Dec 28, 2023

Hello together
I am Jörk From germany and please sorry about my english
I had today an issue with one front brake hose. It so damaged that there was no brake funktion any more. Happy that it was in front of the garage and Not on the street.
Please check your hoses that nothing dangerous happens.
cheers Jörk

Search

Search

Goodridge Brake Hoses

DCPU

DCPU

Fab

emax

Photo Contest Winner

DCPU

emax

Photo Contest Winner

Tazzieman

DCPU

Jörk

Attachments

Latest posts

Share this page